Current Search: pamphlet (x) » Department of Civil, Environmental and Geomatics Engineering (x)
View All Items
Pages
- Title
- Sediment exchange in tidal inlets.
- Creator
- Merz, Clifford Ronald., Florida Atlantic University, Scarlatos, Panagiotis (Pete) D., College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
Sediment exchange characteristics of tidal inlets subjected to tidal excitations are investigated and the results compared to field data measured at Jupiter Inlet, Florida. A specially written computer program combines inlet/nearshore hydrodynamic expressions with bed-load and suspended load sediment transport relationships to examine the building mechanisms of the near-shore tidal ebb shoal. The ebb tidal flow is modeled as a turbulent, plane jet which includes lateral mixing and entrainment...
Show moreSediment exchange characteristics of tidal inlets subjected to tidal excitations are investigated and the results compared to field data measured at Jupiter Inlet, Florida. A specially written computer program combines inlet/nearshore hydrodynamic expressions with bed-load and suspended load sediment transport relationships to examine the building mechanisms of the near-shore tidal ebb shoal. The ebb tidal flow is modeled as a turbulent, plane jet which includes lateral mixing and entrainment, bottom friction, and offshore bathymetric changes. Flood tidal flow is modeled as a potential flow sink with the water being drawn into the inlet from one or more dominant offshore areas depending on the offshore bottom slope. Sediment transport expressions are evaluated at various locations within the offshore flow field and the sediment deposition depth is calculated at that location over one tidal cycle. Model results are plotted and compared to field data for analysis.
Show less - Date Issued
- 1995
- PURL
- http://purl.flvc.org/fcla/dt/15206
- Subject Headings
- Tides, Marine sediments, Sediment transport--Florida--Jupiter Inlet, Inlets
- Format
- Document (PDF)
- Title
- Reliability and accuracy of a GPS unit for tracking vehicles in Palm Beach and Broward counties.
- Creator
- Le Strat, Maud Gael., Florida Atlantic University, Scarlatos, Panagiotis (Pete) D., College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
The purpose of this thesis was to study the reliability and the accuracy of GPS positioning in Palm Beach and Broward counties. By studying the predictions of DOP values using Pathfinder Office and performing some statistical analysis on theoretical GPS data using the software SAS 8.0, the conclusion was made that PDOP values not only depend on the number of available satellites, but also on their relative positions. By field testing, and comparing the recorded data with the theoretical GPS...
Show moreThe purpose of this thesis was to study the reliability and the accuracy of GPS positioning in Palm Beach and Broward counties. By studying the predictions of DOP values using Pathfinder Office and performing some statistical analysis on theoretical GPS data using the software SAS 8.0, the conclusion was made that PDOP values not only depend on the number of available satellites, but also on their relative positions. By field testing, and comparing the recorded data with the theoretical GPS data, it was seen that non-DGPS could be rather accurate. Furthermore, it can be justified for a GPS unit to eliminate the Z coordinate measurement since vertical position errors are larger than horizontal errors, which may lead to improved accuracy. On the other hand, some 'visibility problems' were encountered while testing the GPS units under driving conditions. Different ways to compensate for this disadvantage were studied. In the end, the different features of the GPS unit were discussed and a way to improve the system was also proposed.
Show less - Date Issued
- 2001
- PURL
- http://purl.flvc.org/fcla/dt/12862
- Subject Headings
- Global Positioning System
- Format
- Document (PDF)
- Title
- Evaluation of flexible pipes under shallow burial depths.
- Creator
- Wang, Ning., Florida Atlantic University, Arockiasamy, Madasamy, College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
Flexible plastic and metal pipes are increasingly being used for drainage and storm sewers. When flexible pipes are buried at shallow depths, the pipe behavior will not depend on the dead load pressure above the crown, but rather on the live load pressure (vehicle load). Field tests were designed to evaluate the performance of large diameter flexible pipes of 36 in. (915 mm.) and 48 in. (1050 mm.) under shallow burial depths subjected to the actual vehicle loading. The test pipes included...
Show moreFlexible plastic and metal pipes are increasingly being used for drainage and storm sewers. When flexible pipes are buried at shallow depths, the pipe behavior will not depend on the dead load pressure above the crown, but rather on the live load pressure (vehicle load). Field tests were designed to evaluate the performance of large diameter flexible pipes of 36 in. (915 mm.) and 48 in. (1050 mm.) under shallow burial depths subjected to the actual vehicle loading. The test pipes included high-density polyethylene (HDPE) pipes, polyvinyl chloride (PVC) pipes, steel pipes and aluminum pipes. AASHTO standard pipe installation procedures were followed and pipes subjected to vehicle loads simulating the effect of HS 20-44 trucks. Measurements of interior pipe-wall strains, soil pressures at different depths and pipe deformations were taken to determine the influence of surface vehicle loads. Results of field tests are compared with those based on theoretical analyses.
Show less - Date Issued
- 2002
- PURL
- http://purl.flvc.org/fcla/dt/12929
- Subject Headings
- Underground pipelines--Design and construction, Soil-structure interaction, Structural analysis (Engineering), Earth pressure
- Format
- Document (PDF)
- Title
- The effect of pollution prevention in wood furniture, marina and auto repair industries.
- Creator
- Shalan, Samira Ghazi., Florida Atlantic University, Scarlatos, Panagiotis (Pete) D., College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
Since the industrial revolution, industrial operations have been accompanied with a problem: production of industrial waste, which may be toxic, ignitable, corrosive or reactive. If improperly managed this waste can pose dangerous health and environmental consequences. This study defines the meaning of pollution prevention and outlines its major categories. Three different industries: wood furniture, marina and auto repair industries where chosen to emphasize pollution prevention practices...
Show moreSince the industrial revolution, industrial operations have been accompanied with a problem: production of industrial waste, which may be toxic, ignitable, corrosive or reactive. If improperly managed this waste can pose dangerous health and environmental consequences. This study defines the meaning of pollution prevention and outlines its major categories. Three different industries: wood furniture, marina and auto repair industries where chosen to emphasize pollution prevention practices throughout their operations.
Show less - Date Issued
- 2002
- PURL
- http://purl.flvc.org/fcla/dt/12994
- Subject Headings
- Pollution prevention, Furniture industry and trade--Environmental aspects, Marinas--Environmental aspects, Automobile repair shops--Environmental aspects
- Format
- Document (PDF)
- Title
- Mechanical properties of fiber-reinforced polymer (FRP) composites for concrete bridge deck reinforcement.
- Creator
- Manav, Mukbil Ozan., Florida Atlantic University, Arockiasamy, Madasamy, College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
Durability of concrete bridge decks reinforced with conventional structural steel is a major concern in aggressive environments. To address this problem, there have been efforts, in recent years, to develop and evaluate alternatives to conventional steel. One alternative is fiber reinforced polymer (FRP) composite reinforcement. FRP composites have been used successfully in many industrial applications. This thesis investigates short-term mechanical properties of FRP rebars as reinforcement...
Show moreDurability of concrete bridge decks reinforced with conventional structural steel is a major concern in aggressive environments. To address this problem, there have been efforts, in recent years, to develop and evaluate alternatives to conventional steel. One alternative is fiber reinforced polymer (FRP) composite reinforcement. FRP composites have been used successfully in many industrial applications. This thesis investigates short-term mechanical properties of FRP rebars as reinforcement for concrete bridge decks and discusses results of extensive laboratory tests. Four test methods (tension, flexure, shear and bond) are developed and test protocols are proposed for adoption by AASHTO.
Show less - Date Issued
- 2002
- PURL
- http://purl.flvc.org/fcla/dt/12988
- Subject Headings
- Fibrous composites--Mechanical properties, Polymeric composites, Reinforced concrete, Fiber
- Format
- Document (PDF)
- Title
- Analytical evaluation of marine concrete pile repairs.
- Creator
- Saleh, Zaher A. Abou., Florida Atlantic University, Reddy, Dronnadula V., College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
The purpose of the thesis is to determine and compare the performance characteristics of marine piles corroded by chloride diffusion and repaired by several different methods for both uncracked and cracked concrete and to determine their structural integrity. The long-term objective is the comparison of the analytical values with those from an on-going experimental evaluation. The time for chloride concentration reach the threshold value that initiates corrosion in the reinforcement has been...
Show moreThe purpose of the thesis is to determine and compare the performance characteristics of marine piles corroded by chloride diffusion and repaired by several different methods for both uncracked and cracked concrete and to determine their structural integrity. The long-term objective is the comparison of the analytical values with those from an on-going experimental evaluation. The time for chloride concentration reach the threshold value that initiates corrosion in the reinforcement has been determined by Fick's law, extended to 2-D and 3-D chloride diffusion, for (a) uncracked concrete, and (b) for cracked concrete with the Simplified Smeared Approach (SSA). The structural integrity of the concrete circular pile is compared before and alter repair, by (a) finite element modeling using ANSYS software with the maximum deflection, and (b) beam strength analysis to find the moment capacity for cracked and ultimate conditions. The overall findings indicate the adequacy of the repair procedures.
Show less - Date Issued
- 2003
- PURL
- http://purl.flvc.org/fcla/dt/13062
- Subject Headings
- Concrete piling, Reinforced concrete--Corrosion, Seawater corrosion
- Format
- Document (PDF)
- Title
- Modeling of gasoline emissions from stationary and mobile sources at Port Everglades.
- Creator
- Kimmlingen, Martina M., Florida Atlantic University, Scarlatos, Panagiotis (Pete) D., College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
Available air quality data has been analyzed using the Industrial Source Complex Dispersion Model (ISC3). The FORTRAN program Mobile 5a was utilized to obtain the emission factors. Concerning the toxic volatile organic compounds, the simulations indicate that benzene exceeded the previous permissible air quality standard. Toluene, ethylbenzene and xylene values remained within allowable concentration levels. Long-term annual benzene emissions from stationary sources exceeded the former...
Show moreAvailable air quality data has been analyzed using the Industrial Source Complex Dispersion Model (ISC3). The FORTRAN program Mobile 5a was utilized to obtain the emission factors. Concerning the toxic volatile organic compounds, the simulations indicate that benzene exceeded the previous permissible air quality standard. Toluene, ethylbenzene and xylene values remained within allowable concentration levels. Long-term annual benzene emissions from stationary sources exceeded the former reference concentration of 0.12 mug/m 3 about five times per year, whereas the data for 8 and 24 hours were relatively low. Simulation results for the mobile sources demonstrated that the emission factor is a highly sensitive parameter. Possible realistic scenarios at Port Everglades were obtained through varying benzene concentrations. The results are plotted as concentration contours, in order to visualize areas of suspected health risk associated to air pollution. Compared to the Reference Concentration for Chronic Inhalation Exposure, EPA, the modeled results appear significantly less.
Show less - Date Issued
- 2003
- PURL
- http://purl.flvc.org/fcla/dt/13123
- Subject Headings
- Automobiles--Motors--Exhaust gas--Mathematical models, Harbors--Environmental aspects--Florida, Air--Pollution--Mathematical models, Port Everglades (Fort Lauderdale, Fla)
- Format
- Document (PDF)
- Title
- Contribution of on-site treatment and disposal systems on coastal nutrient loading.
- Creator
- Morin, Frederic., Florida Atlantic University, Meeroff, Daniel E., College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
When onsite treatment and disposal systems (OSTDS) are not properly sited, they can be a potential risk to public health and a source of environmental degradation. In Florida, OSTDS location has proven to be problematic from a water resources perspective. The objective of this study is to quantify the pollutant loading contributions from OSTDS on coastal canals, with regard to nutrients and pathogens indicators (Total Coliform, E. coli, Enterococcus). Two similar single-family residential...
Show moreWhen onsite treatment and disposal systems (OSTDS) are not properly sited, they can be a potential risk to public health and a source of environmental degradation. In Florida, OSTDS location has proven to be problematic from a water resources perspective. The objective of this study is to quantify the pollutant loading contributions from OSTDS on coastal canals, with regard to nutrients and pathogens indicators (Total Coliform, E. coli, Enterococcus). Two similar single-family residential locations were identified: Dania Beach, FL (with 100% OSTDS) and Hollywood, FL (with 100% sewer). Field studies were conducted during the height of the wet and dry seasons. During the wet season, surface water quality of the canal was affected by an OSTDS contribution with higher levels of nutrients and pathogens indicators. During the dry season, no OSTDS impact was detected. OSTDS appear to work properly during the dry season.
Show less - Date Issued
- 2005
- PURL
- http://purl.flvc.org/fcla/dt/13224
- Subject Headings
- Estuarine ecology, Sewage disposal--Florida, Sewage--Purification--Nitrogen removal, Land treatment of wastewater--Florida
- Format
- Document (PDF)
- Title
- 2006-2007 Program Review Civil Engineering.
- Creator
- Florida Atlantic University, Department of Civil, Environmental and Geomatics Engineering, College of Engineering and Computer Science
- Abstract/Description
-
Florida Atlantic University Departmental Dashboard Indicators. Department program reviews for College of Engineering and Computer Science, Florida Atlantic University.
- Date Issued
- 2006-2007
- PURL
- http://purl.flvc.org/fau/fd/FA00007721
- Subject Headings
- Florida Atlantic University -- History
- Format
- Document (PDF)
- Title
- Effect of elevated temperature and fire on structural elements retrofitted by carbon fiber reinforced polymer composites.
- Creator
- Young, Jody David, Jr., Florida Atlantic University, Reddy, Dronnadula V., College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
This thesis presents an experimental investigation for evaluating effects of fire exposure on properties of structural elements retrofitted by carbon fiber reinforced polymers. Mechanical properties of CFRP-strengthened reinforced concrete members, protected with secondary insulation, were investigated, before and after (residual) direct fire exposure. Direct fire contact resulted in a reduction in capacity of 9-20% for CFRP-strengthened RC beams, and 15-34% for CFRP-strengthened RC columns....
Show moreThis thesis presents an experimental investigation for evaluating effects of fire exposure on properties of structural elements retrofitted by carbon fiber reinforced polymers. Mechanical properties of CFRP-strengthened reinforced concrete members, protected with secondary insulation, were investigated, before and after (residual) direct fire exposure. Direct fire contact resulted in a reduction in capacity of 9-20% for CFRP-strengthened RC beams, and 15-34% for CFRP-strengthened RC columns. Furthermore, a dimensional analysis was developed for a heat transfer relationship between full and small-scale specimens, allowing a ¼ exposure time reduction for the latter. Results from experimental investigations demonstrate benefits of employing secondary fire protection to CFRP-strengthened structures, in spite of the glass transition temperature being exceeded in the early stages of the elevated-temperature exposure. Therefore, it is suggested, that fire protection is necessary for a CFRP-strengthened structural member to retain integrity throughout the duration of the fire exposure, and upon return to ambient temperature.
Show less - Date Issued
- 2006
- PURL
- http://purl.flvc.org/fcla/dt/13322
- Subject Headings
- Buildings--Repair and reconstruction, Reinforced concrete, Fiber reinforced plastics, Fire resistant materials, Thermodynamics, Heat engineering, Concrete--Effect of temperature on
- Format
- Document (PDF)
- Title
- Developing a Relationship between NEXRAD Generated Rainfall Values and Rain Gauge Measurements in South Florida.
- Creator
- Skinner, Courtney L., Bloetscher, Frederick, Florida Atlantic University, College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
The South Florida Water Management District (SFWMD) is an agency which relies on a network of nearly 300 rain gauges in order to provide rainfall data for use in operations, modeling, water supply planning, and environmental projects. However, the prevalence of convective and tropical rain events in South Florida during the wet season presents a challenge in that the current rain gauge network may not fully capture rainfall demonstrating high spatial variability. NEXRAD (Next Generation Radar...
Show moreThe South Florida Water Management District (SFWMD) is an agency which relies on a network of nearly 300 rain gauges in order to provide rainfall data for use in operations, modeling, water supply planning, and environmental projects. However, the prevalence of convective and tropical rain events in South Florida during the wet season presents a challenge in that the current rain gauge network may not fully capture rainfall demonstrating high spatial variability. NEXRAD (Next Generation Radar) technology offers water management officials the advantage of providing a spatial account of rainfall, although the relative quality of radar rainfall measurements remains largely unknown. The intent of this study is to examine the relationship between gauge-adjusted NEXRAD data and corresponding rain gauge measurements in order to assess the relative performance of radar and rain gauge technologies for a variety of different conditions.
Show less - Date Issued
- 2006
- PURL
- http://purl.flvc.org/fau/fd/FA00012554
- Subject Headings
- Storms--United States--Florida, Radar meteorology, Precipitation (Meteorology)--Measurement, Rain and rainfall--Measurement
- Format
- Document (PDF)
- Title
- Primary and secondary compression behavior of Florida organic soils.
- Creator
- Riedy, Kristopher W., Florida Atlantic University, Sobhan, Khaled, College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
A comprehensive laboratory investigation was conducted to evaluate the primary and secondary compression behavior of undisturbed organic silts and peats obtained from 11 locations along SR 15/US 98 in Palm Beach County, Florida. A total of 43 consolidation tests were performed. The primary objectives were as follows: (i) to conduct a series of standard consolidation tests to determine the Compression Index, Cc, and the Coefficient of Consolidation, cnu; (ii) to determine the Secondary...
Show moreA comprehensive laboratory investigation was conducted to evaluate the primary and secondary compression behavior of undisturbed organic silts and peats obtained from 11 locations along SR 15/US 98 in Palm Beach County, Florida. A total of 43 consolidation tests were performed. The primary objectives were as follows: (i) to conduct a series of standard consolidation tests to determine the Compression Index, Cc, and the Coefficient of Consolidation, cnu; (ii) to determine the Secondary Compression Index, Calpha, at stress levels (sigmanu'/sigmap') ranging from 0.30 to 1.15; and (iii) to employ the well-known Time-Stress-Compressibility concept to establish a unique relationship between C alpha and Cc. It was found that for all practical purposes, the Calpha/C c ratio at any stress level is 0.03, which is consistent with the values reported in the literature for similar soils. A constant Calpha/Cc ratio provides an approximation of Calpha once C c is determined from a standard consolidation test, and without the need of ongoing laboratory testing to predict long-term settlement.
Show less - Date Issued
- 2006
- PURL
- http://purl.flvc.org/fcla/dt/13386
- Subject Headings
- Soil consolidation--Measurement--Florida, Soil mechanics--Florida--Palm Beach County, Soils--Testing
- Format
- Document (PDF)
- Title
- Modeling of Flexible Pipe for Culvert Application under Shallow Burial Condition.
- Creator
- Limpeteeprakarn, Terdkiat, Carlsson, Leif A., Florida Atlantic University, College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
Flexible thermoplastic p1pes under field and laboratory loading conditions have been examined in the present study. The flexible pipes were tested under truck loading application with shallow soil cover. The pipe-soil system response includes soil stresses around and above the buried pipes, vertical pipe crown diametral strain, and circumferential pipe wall strains. Modeling the pipe-soil system is made using plane strain and thin ring assumptions. A thin ring model using Castigliano's...
Show moreFlexible thermoplastic p1pes under field and laboratory loading conditions have been examined in the present study. The flexible pipes were tested under truck loading application with shallow soil cover. The pipe-soil system response includes soil stresses around and above the buried pipes, vertical pipe crown diametral strain, and circumferential pipe wall strains. Modeling the pipe-soil system is made using plane strain and thin ring assumptions. A thin ring model using Castigliano's theorem is developed to analyze the behavior and response of a flexible pipe under well defined loading conditions and simulate the behavior of the buried pipe under the live load application. Laboratory work was carried out to study the pipe behavior and response under two-point, three-point, and four-point loading configurations. The thin ring model predictions show good agreement with classical solutions specially valid for two-point and three-point loading configurations. Laboratory results were also in good agreement with the predictions. Laboratory results show that the maximum tensile strain for the four-point loading test occurs at inner pipe crown region. Comprehensive efforts were made to correlate the thin ring model predictions with the field test results; however, it appears that the thin ring model cannot be used to simulate the effect of the live load application. A major source of the differences between the predicted and measured values is attributed to the applied load magnitude. A further investigation was carried out to examine the applicability of the model to study the general pipe behavior. The predicted hoop pipe wall strain profile was found to be similar to that of the reported strain profile by Rogers under overall poor soil support condition. Comparison of soil stress distribution shows that the 2D prediction approach provides nonconservative results while the FE analysis agrees more favorably with the measured pressure data. Overall, FE analysis shows that a linearly elastic isotropic model for the surrounding soil and flexible pipes with a fully bonded pipe-soil interface provides a reasonable prediction for soil pressures close to the buried pipes.
Show less - Date Issued
- 2006
- PURL
- http://purl.flvc.org/fau/fd/FA00012573
- Subject Headings
- Structural analysis (Engineering), Pipe, Plastic--Dynamics--Mathematical models, Underground pipelines--Design and construction, Soil-structure interaction
- Format
- Document (PDF)
- Title
- Innovative Expansion of Landfill Capacity Using Geogrid Reinforcements.
- Creator
- Templeton, R. Hayes, Sobhan, Khaled, Florida Atlantic University, College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
An analytical investigation was conducted to evaluate the geotechnical safety and stability of MSW landfills constructed with significantly steepened slopes achieved through geosynthetic reinforcement. The primary motivation for this endeavor was to propose a new design/construction methodology for innovative expansion of landfill capacity. A 2-D plane strain linear elastic analysis was performed with ANSYS finite element software on full-scale MSW landfill structures (with and without...
Show moreAn analytical investigation was conducted to evaluate the geotechnical safety and stability of MSW landfills constructed with significantly steepened slopes achieved through geosynthetic reinforcement. The primary motivation for this endeavor was to propose a new design/construction methodology for innovative expansion of landfill capacity. A 2-D plane strain linear elastic analysis was performed with ANSYS finite element software on full-scale MSW landfill structures (with and without geogrids), having slopes of 1:1, 1:2, and 1:3. Both local and global factors of safety were determined employing the Mohr-Coulomb failure criteria, and compared with traditional solutions using the Bishop's Modified Method. It was found that the landfill slopes could be steepened up to 1:1 using geogrid reinforcement, resulting in higher storage capacity and consequential environmental and economic benefits.
Show less - Date Issued
- 2007
- PURL
- http://purl.flvc.org/fau/fd/FA00012561
- Subject Headings
- Sanitary landfills--Design and construction, Refuse and refuse disposal, Soil mechanics--Mathematical models, Geosynthetics--Mathematical models, Soil stabilization
- Format
- Document (PDF)
- Title
- Technical Feasibility of Nanofiltration Concentrate Treatment with Low Pressure Reverse Osmosis.
- Creator
- Toro, Adriana M., Bloetscher, Frederick, Florida Atlantic University, College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
This study evaluated the technical feasibility o f increasing the typical water recovery of a pilot scale membrane system (85-90%) to 97% by treatment of nanofiltration concentrate with low-pressure reverse osmosis. The study used Biscayne aquifer water (freshwater), and determined that it may be technically feasible to increase the recovery up to approximately 95% when the RO flux is —10 gfd, the feed water pH is reduced to -6.1 with H2 SO4 , and antiscalant in the NF process. The tested...
Show moreThis study evaluated the technical feasibility o f increasing the typical water recovery of a pilot scale membrane system (85-90%) to 97% by treatment of nanofiltration concentrate with low-pressure reverse osmosis. The study used Biscayne aquifer water (freshwater), and determined that it may be technically feasible to increase the recovery up to approximately 95% when the RO flux is —10 gfd, the feed water pH is reduced to -6.1 with H2 SO4 , and antiscalant in the NF process. The tested membranes showed stable and similar performance under the pilot conditions. However, pilot tests were sensitive to pH variations (pH>6.2). The main barrier for increasing the water recovery was fouling caused by iron, carbonate hardness, and iron bacteria. A preliminary cost analysis showed that there is an apparent econom ic advantage when the recovery is greater than 90%. Estimated water cost at 95% recovery is $1.99 compared with $2.69 at the typical 85% recovery.
Show less - Date Issued
- 2007
- PURL
- http://purl.flvc.org/fau/fd/FA00012564
- Subject Headings
- Saline water conversion--Reverse osmosis process, Water--Purification--Reverse osmosis process, Membrane separation, Membranes (Technology)
- Format
- Document (PDF)
- Title
- Analysis of blast/explosion resistant reinforced concrete solid slab and T-Beam bridges.
- Creator
- Abdelahad, Firas A., Florida Atlantic University, College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
This study presents and illustrates a methodology to calculate the capacity of an existing reinforced concrete bridge under a non-conventional blast load due to low and intermediate pressures. ATBlast program is used to calculate the blast loads for known values of charge weight and stand off distance. An excel spreadsheet is generated to calculate ultimate resistance, equivalent elastic stiffness, equivalent elastic deflection, natural period of the beam, the maximum deflection, and the...
Show moreThis study presents and illustrates a methodology to calculate the capacity of an existing reinforced concrete bridge under a non-conventional blast load due to low and intermediate pressures. ATBlast program is used to calculate the blast loads for known values of charge weight and stand off distance. An excel spreadsheet is generated to calculate ultimate resistance, equivalent elastic stiffness, equivalent elastic deflection, natural period of the beam, the maximum deflection, and the maximum rotation in the support for a simple span solid slab and T-Beam bridges. The allowable rotation could be taken as to two degrees. Naval Facility Engineering Command (NAVFAC) approach was adopted, where the inputs were material properties, span length, and area of reinforcement. The use of the Fiber Reinforced Polymer for increasing the capacity of an existing bridge is also presented in this study. Parametric studies were carried out to evaluate the performance of the solid slab and T-Beam bridges under the assumed blast load.
Show less - Date Issued
- 2008
- PURL
- http://purl.flvc.org/fcla/flaent/EN00154040/68_1/98p0132d.pdf, http://purl.flvc.org/FAU/58001
- Subject Headings
- Concrete beams, Vibration, Bridges, Concrete, Fatigue, Reinforced concrete construction, Bridges, Concrete, Design and construction
- Format
- Document (PDF)
- Title
- Development of functional relationships between radar and rain gage data using inductive modeling techniques.
- Creator
- Peters, Delroy., College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
Traditional methods such as distance weighing, correlation and data driven methods have been used in the estimation of missing precipitation data. Also common is the use of radar (NEXRAD) data to provide better spatial distribution of precipitation as well as infilling missing rain gage data. Conventional regression models are often used to capture highly variant nonlinear spatial and temporal relationships between NEXRAD and rain gage data. This study aims to understand and model the...
Show moreTraditional methods such as distance weighing, correlation and data driven methods have been used in the estimation of missing precipitation data. Also common is the use of radar (NEXRAD) data to provide better spatial distribution of precipitation as well as infilling missing rain gage data. Conventional regression models are often used to capture highly variant nonlinear spatial and temporal relationships between NEXRAD and rain gage data. This study aims to understand and model the relationships between radar (NEXRAD) estimated rainfall data and the data measured by conventional rain gages. The study is also an investigation into the use of emerging computational data modeling (inductive) techniques and mathematical programming formulations to develop new optimal functional approximations. Radar based rainfall data and rain gage data are analyzed to understand the spatio-temporal associations, as well as the effect of changes in the length or availability of data on the models. The upper and lower Kissimmee basins of south Florida form the test-bed to evaluate the proposed and developed approaches and also to check the validity and operational applicability of these functional relationships among NEXRAD and rain gage data for infilling of missing data.
Show less - Date Issued
- 2008
- PURL
- http://purl.flvc.org/FAU/166454
- Subject Headings
- Weather control, Mathematical models, Radar meteorology, Technological innovations, Precipitation (Meteorology), Measurement, Weather forecasting, Technological innovations
- Format
- Document (PDF)
- Title
- An Experimental Evaluation of High Volume Fly Ash Structural Concrete made from Recycled Aggregate.
- Creator
- Theodorou, Anthony Lloyd, Sobhan, Khaled, Florida Atlantic University, College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
Three vital factors, namely environmental protection, savings in costs, and strength/durability benefits, make it advantageous to incorporate fly ash of controlled quality and composition in all concrete made from construction demolition (C&D) recycled aggregate. The specific objective of this research was to compare the performance characteristics of High-Volume-Fly-Ash (HVFA) structural concrete containing C&D aggregate with that of normal recycled aggregate concrete containing no fly ash....
Show moreThree vital factors, namely environmental protection, savings in costs, and strength/durability benefits, make it advantageous to incorporate fly ash of controlled quality and composition in all concrete made from construction demolition (C&D) recycled aggregate. The specific objective of this research was to compare the performance characteristics of High-Volume-Fly-Ash (HVFA) structural concrete containing C&D aggregate with that of normal recycled aggregate concrete containing no fly ash. A coordinated experimental program was undertaken which comprised of ( 1) Compressive and Split Tensile strength tests; (2) ASTM durability tests by measuring resistance to chloride-ion penetration; and (3) Flexural strength tests on reinforced concrete beam specimens. Three mix designs were used, all of which had the same water/cement ratio of 0.45 and the same amount of recycled aggregate/yd^3. Mix 1 contained cement and no fly ash, Mix 2 contained 16% replacement of cement by weight, and Mix 3 contained 40% replacement of cement, called a HVF A mix. Results indicate that fly ash increases compressive strength, improves both moment carrying capacity and tension resistance, and increases resistance to chloride-ion attack.
Show less - Date Issued
- 2008
- PURL
- http://purl.flvc.org/fau/fd/FA00012563
- Subject Headings
- Aggregates (Building materials)--Recycling, Fly ash--Recycling, Concrete--Additives--Evaluation, Concrete--Permeability, Industrial minerals--Evaluation
- Format
- Document (PDF)
- Title
- 2009-2010 Program Review Civil, Environmental, and Geomatics Engineering.
- Creator
- Florida Atlantic University, Department of Civil, Environmental and Geomatics Engineering, College of Engineering and Computer Science
- Abstract/Description
-
Florida Atlantic University Departmental Dashboard Indicators. Department program reviews for College of Engineering and Computer Science, Florida Atlantic University.
- Date Issued
- 2009-2010
- PURL
- http://purl.flvc.org/fau/fd/FA00007726
- Subject Headings
- Florida Atlantic University -- History
- Format
- Document (PDF)
- Title
- Blast/explosion resistant analysis of composite steel girder bridge system.
- Creator
- Zhou, Fang., College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
- Abstract/Description
-
The design of bridge structures to resist explosive loads has become more of a concern to the engineering community. This thesis proposes a method to evaluate the effects of conventional blast loads on a two span continuous composite steel girder bridge system. The bridge design is based on AASHTO LRFD method. Resistance capacities of bridge deck and composite steel girder are calculated according to AASHTO specifications. Equivalent blast pressures on the bridge components are obtained....
Show moreThe design of bridge structures to resist explosive loads has become more of a concern to the engineering community. This thesis proposes a method to evaluate the effects of conventional blast loads on a two span continuous composite steel girder bridge system. The bridge design is based on AASHTO LRFD method. Resistance capacities of bridge deck and composite steel girder are calculated according to AASHTO specifications. Equivalent blast pressures on the bridge components are obtained. Response and performance of concrete deck, steel girders, and supporting piers are evaluated under typical blast loads. The blast induced force in the bridge components are computed in the static analyses for varying amounts of TNT. The blast effects in the supporting pier are determined using both static and dynamic analyses. Further research needs to be done in the dynamic analysis of the bridge system subjected to blast loads.
Show less - Date Issued
- 2009
- PURL
- http://purl.flvc.org/FAU/227976
- Subject Headings
- Steel, Structural, Testing, Bridges, Design and construction, Structural dynamics
- Format
- Document (PDF)