Current Search: Vibration Aeronautics (x)
View All Items
(1 - 3 of 3)
- Title
- FLIGHT TESTS OF AN OPEN LOOP HIGHER HARMONIC CONTROL SYSTEM ON AN S-76A HELICOPTER.
- Creator
- WALSH, DAVID M., Florida Atlantic University, Goankar, Gopal, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
- Abstract/Description
-
Flight tests of an open loop higher harmonic vibration control system were conducted on an S-76A helicopter during the early part of 1985. This paper discusses the design, conduct and results of those tests. The flight tests included evaluations of Higher Harmonic Control (HHC) inputs in the longitudinal, lateral and collective axes at varying amplitudes and phases. These flight tests have demonstrated the feasibility of HHC on a medium size, high speed helicopter. Significant vibration...
Show moreFlight tests of an open loop higher harmonic vibration control system were conducted on an S-76A helicopter during the early part of 1985. This paper discusses the design, conduct and results of those tests. The flight tests included evaluations of Higher Harmonic Control (HHC) inputs in the longitudinal, lateral and collective axes at varying amplitudes and phases. These flight tests have demonstrated the feasibility of HHC on a medium size, high speed helicopter. Significant vibration reductions throughout the aircraft were demonstrated at forward speeds up to 150 knots. The capability of HHC to reduce vibrations was also demonstrated at varying rotor speeds and during maneuvers. Structural data obtained during testing, showed a general increase in control system loads during HHC operation. However, no loads were above structural limits and it appears that a control system could be designed with sufficient strength to accept all HHC loads.
Show less - Date Issued
- 1986
- PURL
- http://purl.flvc.org/fcla/dt/14341
- Subject Headings
- Vibration (Aeronautics), Helicopters
- Format
- Document (PDF)
- Title
- Dynamic stall and three-dimensional wake effects on trim, stability and loads of hingeless rotors with fast Floquet theory.
- Creator
- Chunduru, Srinivas Jaya., Florida Atlantic University, Gaonkar, Gopal H., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
- Abstract/Description
-
This dissertation investigates the effects of dynamic stall and three-dimensional wake on isolated-rotor trim, stability and loads. Trim analysis of predicting the pilot's control inputs and the corresponding periodic responses is based on periodic shooting with the fast Floquet theory and damped Newton iteration. Stability analysis, also based on the fast Floquet theory, predicts damping levels and frequencies. Loads analysis uses a force-integration approach to predict the rotating-blade...
Show moreThis dissertation investigates the effects of dynamic stall and three-dimensional wake on isolated-rotor trim, stability and loads. Trim analysis of predicting the pilot's control inputs and the corresponding periodic responses is based on periodic shooting with the fast Floquet theory and damped Newton iteration. Stability analysis, also based on the fast Floquet theory, predicts damping levels and frequencies. Loads analysis uses a force-integration approach to predict the rotating-blade root shears and moments as well as the hub forces and moments. The blades have flap bending, lag bending and torsion degrees of freedom. Dynamic stall is represented by the ONERA stall models of lift, drag and pitching moment, and the unsteady, nonuniform downwash is represented by a three-dimensional, finite-state wake model. Throughout, full blade-stall-wake dynamics is used in that all states are included from trim to stability to loads predictions. Moreover, these predictions are based on four aerodynamic theories--quasisteady linear theory, quasisteady stall theory, dynamic stall theory and dynamic stall and wake theory--and cover a broad range of system parameters such as thrust level, advance ratio, number of blades and blade torsional frequency. The investigation is conducted in three phases. In phase one, the elastic flap-lag-torsion equations are coupled with a finite-state wake model and with linear quasisteady airfoil aerodynamics. The investigation presents convergence characteristics of trim and stability with respect to the number of spatial azimuthal harmonics and radial shape functions in the wake representation. It includes a comprehensive parametric study over a broad range of system parameters. The investigation also includes correlation with the measured lag-damping data of a three-bladed isolated rotor operated untrimmed. In the correlation, three structural models of the root-flexure-blade assembly are used to demonstrate the strengths and the weaknesses of lag-damping predictions. Phase two includes dynamic stall in addition to three-dimensional wake to generate trim and stability results over a comprehensive range of system parameters. It addresses the degree of sophistication necessary in blade discretization and wake representation under dynamically stalled conditions. The convergence and parametric studies isolate the effects of wake, quasisteady stall and dynamic stall on trim and stability. Finally, phase three predicts the rotating blade loads and nonrotating hub loads; the predictions are based on the blade, wake and stall models used in the preceding trim and stability investigations. Although an accurate evaluation of loads requires a more refined blade description, the results isolate and demonstrate the principal dynamic stall and wake effects on the loads.
Show less - Date Issued
- 1995
- PURL
- http://purl.flvc.org/fcla/dt/12426
- Subject Headings
- Floquet theory, Helicopters, Rotors (Helicopters), Vibration (Aeronautics)
- Format
- Document (PDF)
- Title
- Helicopter stability during aggressive maneuvers.
- Creator
- Mohan, Ranjith., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
- Abstract/Description
-
The dissertation investigates helicopter trim and stability during level bank-angle and diving bank-angle turns. The level turn is moderate in that sufficient power is available to maintain level maneuver, and the diving turn is severe where the power deficit is overcome by the kinetic energy of descent. The investigation basically represents design conditions where the peak loading goes well beyond the steady thrust limit and the rotor experiences appreciable stall. The major objectives are:...
Show moreThe dissertation investigates helicopter trim and stability during level bank-angle and diving bank-angle turns. The level turn is moderate in that sufficient power is available to maintain level maneuver, and the diving turn is severe where the power deficit is overcome by the kinetic energy of descent. The investigation basically represents design conditions where the peak loading goes well beyond the steady thrust limit and the rotor experiences appreciable stall. The major objectives are: 1) to assess the sensitivity of the trim and stability predictions to the approximations in modeling stall, 2) to correlate the trim predictions with the UH-60A flight test data, and 3) to demonstrate the feasibility of routinely using the exact fast-Floquet periodic eigenvector method for mode identification in the stability analysis. The UH-60A modeling and analysis are performed using the comprehensive code RCAS (Army's Rotorcraft Comprehensive Analysis System). The trim and damping predictions are based on quasisteady stall, ONERA-Edlin vi (Equations Differentielles Lineaires) and Leishman-Beddoes dynamic stall models. From the correlation with the test data, the strengths and weaknesses of the trim predictions are presented.
Show less - Date Issued
- 2012
- PURL
- http://purl.flvc.org/FAU/3342237
- Subject Headings
- Helicopters, Aerodynamics, Helicopters, Control systems, Rotors (Helicopters), Aerodynamics, Stability of helicopters, Vibration (Aeronautics), Damping
- Format
- Document (PDF)
