View All Items

Title: Synthetic Fiber Reinforced Concrete in Marine Environments and Indirect Tension Test.
Creator: Flaherty, Ryan, Presuel-Moreno, Francisco, Florida Atlantic University, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: An experiment was conducted to evaluate the durability, toughness, and strength of Synthetic Fiber Reinforced Concrete after being immersed in five separate environments for one year at FAU SeaTech. The specimens were molded and reinforced with two-inch Polypropylene/Polyethylene Fibers in a concrete aggregate matrix and were cut into identical sizes. Some of these environments had accelerated parameters meant to increase degradation to simulate longevity and imitate harsh environments or...
Show moreAn experiment was conducted to evaluate the durability, toughness, and strength of Synthetic Fiber Reinforced Concrete after being immersed in five separate environments for one year at FAU SeaTech. The specimens were molded and reinforced with two-inch Polypropylene/Polyethylene Fibers in a concrete aggregate matrix and were cut into identical sizes. Some of these environments had accelerated parameters meant to increase degradation to simulate longevity and imitate harsh environments or seawater conditions. The environments consisted of: a high humidity locker (ideal conditions), submerged in the Intracoastal Waterway (FAU barge), seawater immersion, a wet and dry seawater immersion simulating a splash/tidal zone, and another in low pH seawater. The latter three were in an elevated temperature room (87-95°F) which produced more degradative properties. The specimens were monitored and the environments were controlled. The specimens were then evaluated using the IDT test method using force to initiate first-cracking and post-cracking behaviors.
Show less
Date Issued: 2018
PURL: http://purl.flvc.org/fau/fd/FA00013029
Subject Headings: Reinforced concrete, Fiber-reinforced concrete--Testing, Synthetic fibers
Format: Document (PDF)

Title: FRACTURE MECHANICS OF FIBER REINFORCED CONCRETE AND THE DURABILITY OF FIBER REINFORCED AND AIR-ENTRAINED CONCRETE EXPOSED TO FREEZE-THAW CYCLES (FATIGUE).
Creator: JEANFREAU, JAMES JOSEPH, JR., Florida Atlantic University, Arockiasamy, Madasamy
Abstract/Description: This thesis presents the experimental and analytical investigation of fiber (steel and Kevlar) reinforced concrete (FRC) to determine its fracture mechanic properties especially the J-integral. The freeze-thaw durability of fiber reinforced and air-entrained concrete is also investigated. The fiber reinforced concretes were found to have a much greater flexural strength and toughness compared to plain concrete. The compressive strength was found to decrease with the addition of fibers and air...
Show moreThis thesis presents the experimental and analytical investigation of fiber (steel and Kevlar) reinforced concrete (FRC) to determine its fracture mechanic properties especially the J-integral. The freeze-thaw durability of fiber reinforced and air-entrained concrete is also investigated. The fiber reinforced concretes were found to have a much greater flexural strength and toughness compared to plain concrete. The compressive strength was found to decrease with the addition of fibers and air-entrainment. In all cases the addition of 1.0% or more fibers prevented catastrophic failures. The mixing and setting of FRC requires a rigorous procedure which must be followed to achieve a homogeneous matrix.
Show less
Date Issued: 1986
PURL: http://purl.flvc.org/fcla/dt/14334
Subject Headings: Reinforced concrete, Fiber, Fracture mechanics
Format: Document (PDF)

Title: Driveability of concrete piles pretensioned with CFRP and confinement effects of CFRP hoops in reinforced concrete columns.
Creator: Potturu, Rama Kumar., Florida Atlantic University, Arockiasamy, Madasamy, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: Carbon Fiber Reinforced Plastics has recently has been recognized as an alternative to conventional steel reinforcement in concrete due to its excellent resistance to corrosion. Four rectangular concrete beams and four concrete columns reinforced with CFRP bars were cast for the study of the long term behavior under uniform sustained loading. The beams were simply supported and subjected to uniform sustained loading. The columns were arranged in a steel reaction framework. The beams and...
Show moreCarbon Fiber Reinforced Plastics has recently has been recognized as an alternative to conventional steel reinforcement in concrete due to its excellent resistance to corrosion. Four rectangular concrete beams and four concrete columns reinforced with CFRP bars were cast for the study of the long term behavior under uniform sustained loading. The beams were simply supported and subjected to uniform sustained loading. The columns were arranged in a steel reaction framework. The beams and columns were instrumented and monitored to observe the change in the behavior due to the creep and shrinkage of concrete. An analytical method is developed to predict the long term behavior of CFRP reinforced concrete members. The calculated deformations compare reasonably with the experimental values. A modified equation for the calculation of the long term deflection is proposed for CFRP reinforced concrete beams. A simplified equation for the calculation of the creep coefficient is also proposed.
Show less
Date Issued: 1997
PURL: http://purl.flvc.org/fcla/dt/15507
Subject Headings: Fiber reinforced plastics, Concrete piling, Reinforced concrete, Columns, Concrete
Format: Document (PDF)

Title: Driveability of concrete piles pretensioned with CFRP.
Creator: Gemmell, Thomas Scott., Florida Atlantic University, Arockiasamy, Madasamy
Abstract/Description: Four concrete piles prestressed with Carbon Fiber Reinforced Plastics were cast, in which two piles were fabricated with CFRP transverse reinforcement. The remaining two were provided with transverse steel spiral reinforcement. The piles were designed according to Florida Department of Transportation (FDOT) guidelines. The Pile Driving Analyzer (PDA) was chosen as the primary data acquisition system for the pile driving due to its mobility, reliability and robustness based on the high...
Show moreFour concrete piles prestressed with Carbon Fiber Reinforced Plastics were cast, in which two piles were fabricated with CFRP transverse reinforcement. The remaining two were provided with transverse steel spiral reinforcement. The piles were designed according to Florida Department of Transportation (FDOT) guidelines. The Pile Driving Analyzer (PDA) was chosen as the primary data acquisition system for the pile driving due to its mobility, reliability and robustness based on the high frequency excitation. The Pre-driving analysis consisted of several stages. The estimated static bearing capacity of the experimental piles was first calculated followed by SPT sampling at the pile driving site to obtain the soil conditions. The percent skin and toe friction, ultimate capacities, driving system parameters, maximum displacements, energy, integrity, tensions and static capacity were determined prior to pile driving. The piles were then driven and the data from the pile driving compared with the analysis.
Show less
Date Issued: 1997
PURL: http://purl.flvc.org/fcla/dt/15496
Subject Headings: Concrete piling, Fiber reinforced plastics, Prestressed concrete
Format: Document (PDF)

Title: Time-dependent behavior of reinforced concrete members with carbon fiber reinforced plastics (CFRP) under sustained loads.
Creator: Chidambaram, Senthilkumar., Florida Atlantic University, Arockiasamy, Madasamy
Abstract/Description: Carbon Fiber Reinforced Plastics has recently has been recognized as an alternative to conventional steel reinforcement in concrete due to its excellent resistance to corrosion. Four rectangular concrete beams and four concrete columns reinforced with CFRP bars were cast for the study of the long term behavior under uniform sustained loading. The beams were simply supported and subjected to uniform sustained loading. The columns were arranged in a steel reaction framework. The beams and...
Show moreCarbon Fiber Reinforced Plastics has recently has been recognized as an alternative to conventional steel reinforcement in concrete due to its excellent resistance to corrosion. Four rectangular concrete beams and four concrete columns reinforced with CFRP bars were cast for the study of the long term behavior under uniform sustained loading. The beams were simply supported and subjected to uniform sustained loading. The columns were arranged in a steel reaction framework. The beams and columns were instrumented and monitored to observe the change in the behavior due to the creep and shrinkage of concrete. An analytical method is developed to predict the long term behavior of CFRP reinforced concrete members. The calculated deformations compare reasonably with the experimental values. A modified equation for the calculation of the long term deflection is proposed for CFRP reinforced concrete beams. A simplified equation for the calculation of the creep coefficient is also proposed.
Show less
Date Issued: 1997
PURL: http://purl.flvc.org/fcla/dt/15424
Subject Headings: Fiber reinforced plastics, Columns, Concrete, Concrete beams
Format: Document (PDF)

Title: Experimental studies on flexural behavior of CFRP retrofitted concrete members.
Creator: Raghavachary, Sowrirajan., Florida Atlantic University, Arockiasamy, Madasamy, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: The flexural behavior of rectangular concrete beams strengthened with externally bonded Carbon Fiber Reinforced Plastic (CFRP) laminates was studied by varying the number of plates bonded to their bottom tensile face. The increases in strength and stiffness of the beams provided by the bonded plates, over control beam without CFRP plates, were evaluated. Failure loads of the beams were determined by the ACI strain compatibility method using a FORTRAN software developed for this purpose. The...
Show moreThe flexural behavior of rectangular concrete beams strengthened with externally bonded Carbon Fiber Reinforced Plastic (CFRP) laminates was studied by varying the number of plates bonded to their bottom tensile face. The increases in strength and stiffness of the beams provided by the bonded plates, over control beam without CFRP plates, were evaluated. Failure loads of the beams were determined by the ACI strain compatibility method using a FORTRAN software developed for this purpose. The predicted collapsed load agrees reasonably well with the actual failure load. Precracked solid and voided slab bridge models retrofitted with varying number of CFRP laminates were used to evaluate their contribution to the flexural resistance. The increases in strength and stiffness of the retrofitted slabs were based on the deflections, strains and crack patterns at ultimate load. Theoretical analyses to predict the load-deflection behavior of the precracked sections were performed using PCFRAME software. The predicted values agree reasonably well with the experimental results.
Show less
Date Issued: 1995
PURL: http://purl.flvc.org/fcla/dt/15120
Subject Headings: Fiber reinforced plastics, Reinforced concrete, Fiber, Bridges, Concrete, Prestressed concrete, Concrete beams--Fatigue
Format: Document (PDF)

Title: Behavior of eccentrically loaded slender concrete columns reinforced with CFRP bars.
Creator: Xia, Wei., Florida Atlantic University, Arockiasamy, Madasamy, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: In a highly corrosive environment, corrosion is the main factor leading to deterioration and eventual failure of conventional reinforced or prestressed concrete structures. Carbon Fiber Reinforced Plastics (CFRP) are considered as an alternative to steel reinforcement due to its excellent corrosion resistance. This investigation was conducted to establish the feasibility of using CFRP cables as reinforcing elements in reinforced concrete columns. Besides investigating durability of CFRP...
Show moreIn a highly corrosive environment, corrosion is the main factor leading to deterioration and eventual failure of conventional reinforced or prestressed concrete structures. Carbon Fiber Reinforced Plastics (CFRP) are considered as an alternative to steel reinforcement due to its excellent corrosion resistance. This investigation was conducted to establish the feasibility of using CFRP cables as reinforcing elements in reinforced concrete columns. Besides investigating durability of CFRP cables in adverse environments (alkali and sea water) experimental and theoretical studies were carried out to study the behavior of CFRP reinforced concrete slender columns under combined axial load and bending moment. Exposure to air, sea water and alkali environments with alternating wet/dry cycles had no adverse effect on the strength of the CFRP cables. The CFRP reinforced concrete columns subjected to eccentric loads exhibited excellent ultimate load capacity. Feasibility of using CFRP cables in the reinforced concrete columns is assessed based on deflections, strains, curvatures, crack distributions, first crack loads and ultimate loads.
Show less
Date Issued: 1997
PURL: http://purl.flvc.org/fcla/dt/15426
Subject Headings: Reinforced concrete, Columns, Concrete, Fiber reinforced plastics, Eccentric loads
Format: Document (PDF)

Title: Feasibility studies on carbon fiber composite cables in reinforced/prestressed concrete structures.
Creator: Kanneganti, Srikanth., Florida Atlantic University, Arockiasamy, Madasamy, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: The feasibility studies on the use of non-metallic continuous fiber reinforcement in reinforced and prestressed concrete structures are presented herein. Experimental results from studies on relaxation, bond and transfer length of Carbon Fiber Composite Cables (CFCC) are presented followed by results of flexural load tests on concrete beams reinforced and prestressed with CFCC. Durability of the CFCC is another prime concern, and hence part of the study also focuses on establishing the...
Show moreThe feasibility studies on the use of non-metallic continuous fiber reinforcement in reinforced and prestressed concrete structures are presented herein. Experimental results from studies on relaxation, bond and transfer length of Carbon Fiber Composite Cables (CFCC) are presented followed by results of flexural load tests on concrete beams reinforced and prestressed with CFCC. Durability of the CFCC is another prime concern, and hence part of the study also focuses on establishing the durability of the CFCC exposed to aggressive environments like alkali solution and sea water. The basic mechanics that govern the structural behavior of the beams, provide important insight into the potential that CFCC has to offer.
Show less
Date Issued: 1994
PURL: http://purl.flvc.org/fcla/dt/15080
Subject Headings: Fiber reinforced plastics, Reinforced concrete, Fiber, Composite materials, Prestressed concrete construction--Deterioration, Carbon fibers
Format: Document (PDF)

Title: Adhesive Joint Analyses Using Ansys CZM Modeling of a Prefabricated Hybrid Concrete-GFRP-CFRP Unit.
Creator: Kabaluk, Maksim, Arockiasamy, Madasamy, Florida Atlantic University, College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
Abstract/Description: The present study reviews applications of FRP materials joined by structural adhesives in civil engineering. FE analysis with mix-mode cohesive zone material model (CZM) was used to analyze stresses induced in two structural adhesives joining dissimilar materials (concrete GFRP-CFRP) of the hybrid-composite unit. The predicted failure loads, displacements and deformation by the 3-D non-linear FE analysis in the present study are in good agreement with the experimental results of the hybrid...
Show moreThe present study reviews applications of FRP materials joined by structural adhesives in civil engineering. FE analysis with mix-mode cohesive zone material model (CZM) was used to analyze stresses induced in two structural adhesives joining dissimilar materials (concrete GFRP-CFRP) of the hybrid-composite unit. The predicted failure loads, displacements and deformation by the 3-D non-linear FE analysis in the present study are in good agreement with the experimental results of the hybrid-composite unit reported by Deskovic et al. (1995). The contact analysis revealed a complex 3-D state of stress in the bondlines of both structural adhesives. It is concluded that higher joint strength is expected when a ductile adhesive is used.
Show less
Date Issued: 2019
PURL: http://purl.flvc.org/fau/fd/FA00013222
Subject Headings: Adhesive joints, Fiber reinforced polymers, Composites, Concrete
Format: Document (PDF)

Title: Microbial Induced Degradation in Synthetic Fiber Reinforced Concrete Samples in South Florida.
Creator: Parkinson, Jacqueline Cecile, Presuel-Moreno, Francisco, Florida Atlantic University, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: Synthetic fiber reinforced concrete sample sets were exposed to two different environments. One set, of six samples, was exposed to filtered seawater in the lab with wet and dry cycles, while the other set of samples was exposed, on a barge, to the marine environment, in the intracoastal waterways, at SeaTech. The samples were exposed for 8 months, and then removed for experimental and mechanical testing. Upon removal, the barge samples were photographed to observe surface organisms that were...
Show moreSynthetic fiber reinforced concrete sample sets were exposed to two different environments. One set, of six samples, was exposed to filtered seawater in the lab with wet and dry cycles, while the other set of samples was exposed, on a barge, to the marine environment, in the intracoastal waterways, at SeaTech. The samples were exposed for 8 months, and then removed for experimental and mechanical testing. Upon removal, the barge samples were photographed to observe surface organisms that were attached to each sample. The barge samples, after cleaning, were then exposed to UV light to observe surface bacteria. The barge samples were also taken to Harbor Branch facility for DNA testing, and then sent in for sequencing. This sequencing was used to identify the organisms that were present inside the concrete samples. An Indirect Tensile Strength Test, IDT, was performed on both sets of samples to observe the first crack, max load, and fracture toughness of each sample. The Barge samples had a lower first crack, max load, and fracture toughness, which means that it took less force to break these samples, than the Seawater samples. As the fiber content increased, the Seawater samples grew stronger, while the Barge samples grew weaker. Also, as the fiber content increased, the biodiversity found on the surface of the Barge samples increased as well.
Show less
Date Issued: 2019
PURL: http://purl.flvc.org/fau/fd/FA00013251
Subject Headings: Fiber-reinforced concrete, Florida, Concrete--Deterioration, Microbes
Format: Document (PDF)

Title: Comparative evaluation of the performance of concrete wall panels, with and without fiber reinforcement.
Creator: Germain, Gerson S., Florida Atlantic University, Reddy, Dronnadula V.
Abstract/Description: This investigation addresses the evaluation of the increase in structural integrity of concrete wall panels by the addition of polypropylene fibers. The test methodology used was the evaluation of flexural (simply-supported and cantilever), shear (in-plane and punching), and impact behavior. The concrete panels comprised sets with (i) regular reinforcement (ACI code based), (ii) Reinforced concrete panels: 0.2% fibers with minimum ACI reinforcement, FRC 2, (iii) 0.3% fibers without...
Show moreThis investigation addresses the evaluation of the increase in structural integrity of concrete wall panels by the addition of polypropylene fibers. The test methodology used was the evaluation of flexural (simply-supported and cantilever), shear (in-plane and punching), and impact behavior. The concrete panels comprised sets with (i) regular reinforcement (ACI code based), (ii) Reinforced concrete panels: 0.2% fibers with minimum ACI reinforcement, FRC 2, (iii) 0.3% fibers without reinforcement, FRC 3, and (iv) plain beams without reinforcement. The instrumentation consisted of deflection and electrical strain gages, a slope indicator for slope testing, and an oscilloscope with a camera attachment for monitoring load and energy traces in impact testing. The normalized (adjusted for concrete strength variations) ultimate load and energy values were compared. The findings indicated enhancement of ductility and shear strength for the fiber reinforced specimens, which are very desirable for sudden and impact loading conditions associated with hurricane-type loading.
Show less
Date Issued: 2000
PURL: http://purl.flvc.org/fcla/dt/12678
Subject Headings: Concrete walls--Design and construction, Reinforced concrete, Fiber
Format: Document (PDF)

Title: SYNTHETIC FIBER REINFORCED CONCRETE PERFORMANCE AFTER PROLONGED ENVIRONMENTAL EXPOSURE UTILIZING THE MODIFIED INDIRECT TENSILE TEST.
Creator: Ellis, Spencer G., Presuel-Moreno, Francisco, Florida Atlantic University, Department of Ocean and Mechanical Engineering, College of Engineering and Computer Science
Abstract/Description: In order to study the mechanical performance of dry-cast synthetic fiber reinforced concrete (SynFRC), samples of varying geometry, fiber content, and environmental exposure were developed and tested using the modified indirect tensile test. The samples created consisted of three different thicknesses (with two different geometries), and six different fiber contents that differed in either type, or quantity, of fibers. Throughout the duration of this research, procedures for inflicting...
Show moreIn order to study the mechanical performance of dry-cast synthetic fiber reinforced concrete (SynFRC), samples of varying geometry, fiber content, and environmental exposure were developed and tested using the modified indirect tensile test. The samples created consisted of three different thicknesses (with two different geometries), and six different fiber contents that differed in either type, or quantity, of fibers. Throughout the duration of this research, procedures for inflicting detrimental materials into the concrete samples were employed at a number of different environments by implementing accelerated rates of deterioration using geometric adjustments, increased temperature exposure, wetting/drying cycles, and preparation techniques. The SynFRC samples studied were immersed in a wide range of environments including: the exposure of samples to high humidity and calcium hydroxide environments, which served at the control group, while the sea water, low pH, and barge conditioning environments were used to depict the real world environments similar to what would be experienced in the Florida ecosystem. As a result of this conditioning regime, the concrete was able to imitate the real-world effects that the environments would have inflicted if exposed for long durations after an exposure period of only 20-24 months. Having adequately conditioned the samples in their respective environments, they were then tested (and forensically investigated) using the modified indirect tensile testing method to gather data regarding each sample’s toughness and load handling capability. By analyzing the results from each sample, the toughness was calculated by taking the area under the force displacement curve. From these toughness readings it was found that possible degradation occurred between the fiber-matrix interface of some of the concrete samples conditioned in the Barge environment. From these specimens that were immersed in the barge environment, a handful of them exhibited multiple episodes of strain softening characteristics within their force displacement curves. In regard to the fibers used within the samples, the PVA fibers tended to pull off more while the Tuff Strand SF fibers had the highest tendency to break (despite some of the fibers showing similar pull off and breaking failure characteristics). When it comes to the overall thickness of the sample, there was clear correlation between the increase in size and the increase in sample toughness, however the degree to which it correlates varies from sample to sample.
Show less
Date Issued: 2020
PURL: http://purl.flvc.org/fau/fd/FA00013466
Subject Headings: Reinforced concrete, Fiber-reinforced concrete--Testing, Reinforced concrete--Mechanical properties, Tensile Strength, Concrete—Environmental testing
Format: Document (PDF)

Title: Flexural Behavior of Concrete Using Basalt FRP Rebar.
Creator: Trotsek, Dylan, Arockiasamy, Madasamy, Florida Atlantic University, College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
Abstract/Description: The objective of this research is to determine if the deflection equations currently adopted in ACI 440.1r-15 and previously ACI 440.1r-06 accurately reflect the flexural behavior of an overreinforced Basalt Fiber Reinforced Polymer (BFRP) concrete beam. This was accomplished with experimental, analytical and numerical models. The experiment consisted of two beams doublyreinforced with BFRP rebar. A three-point flexural test on beams with a 30 in. clear span was performed and the deflections...
Show moreThe objective of this research is to determine if the deflection equations currently adopted in ACI 440.1r-15 and previously ACI 440.1r-06 accurately reflect the flexural behavior of an overreinforced Basalt Fiber Reinforced Polymer (BFRP) concrete beam. This was accomplished with experimental, analytical and numerical models. The experiment consisted of two beams doublyreinforced with BFRP rebar. A three-point flexural test on beams with a 30 in. clear span was performed and the deflections were recorded with a dial gauge and LVDT system. This data was compared to the equations from ACI 440.1r-06, ACI 440.1r-15, Branson’s equation and a numerical model created in ANSYS Mechanical APDL. Experimental results show a stiffer beam than expected when compared to the four predictive models for deflection. This can be due to the level of over-reinforcement and the small clear-span to depth ratio. Further research should be conducted to determine the cause for the additional stiffness.
Show less
Date Issued: 2017
PURL: http://purl.flvc.org/fau/fd/FA00004920, http://purl.flvc.org/fau/fd/FA00004920
Subject Headings: Reinforced concrete construction--Mathematical models., Structural analysis (Engineering), Fiber-reinforced concrete.
Format: Document (PDF)

Title: Strength and toughness of HDPE fiber reinforced aggregate concrete as a sustainable construction material.
Creator: Numa, Roody., College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
Abstract/Description: An experimental study was conducted on the strength and toughness characteristics of concrete made from recycled aggregate, cement and fly ash reinforced with reclaimed high density polyethylene plastic (HDPE) fibers. The objectives of the investigation were: (1) to evaluate the performance of a sustainable concrete containing up to 90% recycled materials; (2) to determine the variation of strength and toughness with a Fiber Factor incorporating length, width and amount of HDPE fibers; (3) to...
Show moreAn experimental study was conducted on the strength and toughness characteristics of concrete made from recycled aggregate, cement and fly ash reinforced with reclaimed high density polyethylene plastic (HDPE) fibers. The objectives of the investigation were: (1) to evaluate the performance of a sustainable concrete containing up to 90% recycled materials; (2) to determine the variation of strength and toughness with a Fiber Factor incorporating length, width and amount of HDPE fibers; (3) to identify the best performing mix design based on tensile strength and toughness and (4) to provide some guidelines for the use of this sustainable composite in Civil Engineering construction. The results showed that the HDPE fiber reinforcements did not improve the compressive strength of the mixture. However, HDPE fibers improved the ductility and toughness which may be beneficial for structural and pavement applications.
Show less
Date Issued: 2011
PURL: http://purl.flvc.org/FAU/3172430
Subject Headings: Fibrous composites, Cement composites, Reinforced concrete, Fiber, Conposite-reinforced concrete
Format: Document (PDF)

Title: Mechanical properties of fiber-reinforced polymer (FRP) composites for concrete bridge deck reinforcement.
Creator: Manav, Mukbil Ozan., Florida Atlantic University, Arockiasamy, Madasamy, College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
Abstract/Description: Durability of concrete bridge decks reinforced with conventional structural steel is a major concern in aggressive environments. To address this problem, there have been efforts, in recent years, to develop and evaluate alternatives to conventional steel. One alternative is fiber reinforced polymer (FRP) composite reinforcement. FRP composites have been used successfully in many industrial applications. This thesis investigates short-term mechanical properties of FRP rebars as reinforcement...
Show moreDurability of concrete bridge decks reinforced with conventional structural steel is a major concern in aggressive environments. To address this problem, there have been efforts, in recent years, to develop and evaluate alternatives to conventional steel. One alternative is fiber reinforced polymer (FRP) composite reinforcement. FRP composites have been used successfully in many industrial applications. This thesis investigates short-term mechanical properties of FRP rebars as reinforcement for concrete bridge decks and discusses results of extensive laboratory tests. Four test methods (tension, flexure, shear and bond) are developed and test protocols are proposed for adoption by AASHTO.
Show less
Date Issued: 2002
PURL: http://purl.flvc.org/fcla/dt/12988
Subject Headings: Fibrous composites--Mechanical properties, Polymeric composites, Reinforced concrete, Fiber
Format: Document (PDF)

Title: Crack propagation in concrete structural members strengthened with bonded fiber reinforced polymer plastic (FRP) laminates.
Creator: Gervois, Gonzague., Florida Atlantic University, Reddy, Dronnadula V.
Abstract/Description: This thesis presents an experimental and analytical investigation of concrete structural members strengthened with externally bonded composite laminates with varying configurations. Parameters, such as size, type of laminate, debond, etc., are evaluated from the viewpoint of stress patterns and their influence on interfacial debonds. Stress patterns in the structure and stress intensity factors around crack tips are determined using a finite element model developed for this purpose. The study...
Show moreThis thesis presents an experimental and analytical investigation of concrete structural members strengthened with externally bonded composite laminates with varying configurations. Parameters, such as size, type of laminate, debond, etc., are evaluated from the viewpoint of stress patterns and their influence on interfacial debonds. Stress patterns in the structure and stress intensity factors around crack tips are determined using a finite element model developed for this purpose. The study also includes a precise description of cracking and the failure function of each parameter investigated. Besides the development of an innovative finite element program, which enables the study of interfacial cracks in structures with highly nonlinear behavior and multiple irregular cracking patterns, the significant contributions include the effect of laminate geometry, the inefficiency of laminate prestressing, the negative effect of end debond, and the insignificant effect of midspan debond on the cracking and the strength of a laminated concrete structural member.
Show less
Date Issued: 1997
PURL: http://purl.flvc.org/fcla/dt/15498
Subject Headings: Fiber reinforced plastics, Laminated materials, Concrete--Cracking
Format: Document (PDF)

Title: Feasibility of using carbon fiber reinforced plastic tendons in prestressed concrete Double-Tee bridge system.
Creator: Zhuang, Ming., Florida Atlantic University, Arockiasamy, Madasamy, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: One of the major problems the construction industry faces today is corrosion of reinforcing and prestressing steel, which significantly affects the durability of concrete structures. Fiber reinforced plastics (FRPs) are highly regarded as prospective replacement for steel in prestressed concrete structures under corrosive environment. This investigation was conducted to establish the feasibility of using Carbon Fiber Composite (CFC) cables as reinforcing/prestressing elements in concrete...
Show moreOne of the major problems the construction industry faces today is corrosion of reinforcing and prestressing steel, which significantly affects the durability of concrete structures. Fiber reinforced plastics (FRPs) are highly regarded as prospective replacement for steel in prestressed concrete structures under corrosive environment. This investigation was conducted to establish the feasibility of using Carbon Fiber Composite (CFC) cables as reinforcing/prestressing elements in concrete bridge structures. Besides investigating durability of CFC cables and pretensioned concrete beams with CFC cables in adverse environments (alkali and seawater), flexure and shear tests were performed on single Double-Tee beams, together with service load behavior, fatigue strength and ultimate load capacity tests on a half scale model Double-Tee girder bridge system prestressed with CFC cables. Exposure to seawater and alkali environments has no adverse effect on the strength of the CFRP tendons as well as the pretensioned beams with CFRP. Based on the flexural strength tests on Double-Tee beams, the bond between CFRP tendons and concrete is satisfactory. The Double-Tee bridge system exhibited good fatigue resistance and adequate ductility under ultimate load conditions. The ultimate load capacity of the bridge is approximately three times the service load corresponding to two HS20-44 trucks and equals 2.4 times the first crack load. Finite element analyses were carried out to predict elastic deformations and collapse load of the Double-Tee bridge prestressed with CFC cables. Feasibility of using CFC cables in bridge structures is assessed based on the experimental and analytical parameters such as deflections, strains, crack distributions and crack widths.
Show less
Date Issued: 1996
PURL: http://purl.flvc.org/fcla/dt/12465
Subject Headings: Carbon fibers, Composite construction, Fiber reinforced plastics, Bridges, Iron and steel, Reinforced concrete construction, Prestressed concrete construction
Format: Document (PDF)

Title: Modified Indirect Tension Testing of Synthetic Fiber Reinforced Concrete Samples Exposed to Different Environmental Conditions.
Creator: Santillan Barragan, Ingrid Susana, Presuel-Moreno, Francisco, Florida Atlantic University, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: Laboratory experiments were conducted to observe, document and evaluate the mechanical behavior of Fiber Reinforced Concrete after being submitted to five different environments for 8 months. The specimens were molded and reinforced with synthetic fibers with a composition similar to that used for dry-cast concrete. Four different types of fibers with different composition were used. The fibers were mixed with the concrete to create the samples and the samples were exposed to different...
Show moreLaboratory experiments were conducted to observe, document and evaluate the mechanical behavior of Fiber Reinforced Concrete after being submitted to five different environments for 8 months. The specimens were molded and reinforced with synthetic fibers with a composition similar to that used for dry-cast concrete. Four different types of fibers with different composition were used. The fibers were mixed with the concrete to create the samples and the samples were exposed to different environmental conditions. Some of these environments were meant to increase degradation of the interface fiber-concrete to simulate longevity and imitate harsh environments or marine conditions. The environments consisted of: a high humidity locker (laboratory conditions), submerged in the Intracoastal Waterway in a barge (SeaTech), a wet/dry cycle in seawater immersion simulating a splash/tidal zone, low pH wet/dry seawater immersion cycle and samples submerged in calcium hydroxide solution. The latter three were in an elevated temperature tank (87-95°F) to increase degradation process. The specimens were monitored weekly and the environments were controlled. Then, specimens were evaluated using different mechanical testing as the Indirect Tensile (IDT) test method, compressive strength according to ASTM standards. Results of testing were documented and observed in this study for further understanding of mechanical properties of Fiber Reinforced concrete. Forensic observation of fiber distribution after the IDT tests were also performed.
Show less
Date Issued: 2019
PURL: http://purl.flvc.org/fau/fd/FA00013258
Subject Headings: Concrete--Environmental testing, Fiber-reinforced concrete--Testing, Tensile Strength, Materials--Compression testing
Format: Document (PDF)

Title: Analytical studies of concrete double-tee bridge system prestressed with FRP materials.
Creator: Qiao, Pizhong., Florida Atlantic University, Arockiasamy, Madasamy, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: The finite element analyses of the concrete bridge system and single double-tee beams are carried out using both orthotropic and isotropic modeling including linear and nonlinear behavior. The orthotropic concrete double-tee bridge system is modeled to predict the deformational behavior of bridge deck under the AASHTO service loading conditions in the static regimes. The nonlinear analyses of reinforced and prestressed concrete rectangular beams are also carried out to verify the validity of...
Show moreThe finite element analyses of the concrete bridge system and single double-tee beams are carried out using both orthotropic and isotropic modeling including linear and nonlinear behavior. The orthotropic concrete double-tee bridge system is modeled to predict the deformational behavior of bridge deck under the AASHTO service loading conditions in the static regimes. The nonlinear analyses of reinforced and prestressed concrete rectangular beams are also carried out to verify the validity of modeling. Both the linear and nonlinear finite element analyses for single double-tee beams prestressed with FRP materials are carried out in this study. In this research, the MARC finite element software on the VAX frame is used as a tool to carry out the analyses.
Show less
Date Issued: 1993
PURL: http://purl.flvc.org/fcla/dt/14936
Subject Headings: Finite element method, Fiber reinforced plastic, Bridges, Concrete--Floors, Prestressed concrete beams
Format: Document (PDF)

Title: Debond of CFRP laminate bonded with concrete exposed to harsh environmental conditions.
Creator: Baker, William Arnold., Florida Atlantic University, Arockiasamy, Madasamy
Abstract/Description: This study evaluates the effectiveness of using externally bonded CFRP plates for repairing damaged prestressed concrete structures as an alternative to the metal sleeve splice. Currently the metal sleeve splice is the most often used method for the repair of damaged prestressed concrete bridges. The use of bonded CFRP plates could be a viable alternative to the use of steel in this type of repair because of their high strength and stiffness, resistance to corrosion and low weight. The bond...
Show moreThis study evaluates the effectiveness of using externally bonded CFRP plates for repairing damaged prestressed concrete structures as an alternative to the metal sleeve splice. Currently the metal sleeve splice is the most often used method for the repair of damaged prestressed concrete bridges. The use of bonded CFRP plates could be a viable alternative to the use of steel in this type of repair because of their high strength and stiffness, resistance to corrosion and low weight. The bond strength of CFRP plates bonded to concrete was evaluated by the use of a peel test and correlated by a finite element analysis. The peel test showed that the structural system was not significantly adversely effected by harsh environmental conditions. The results of this study showed that the use of CFRP plates is a feasible alternative to steel in the metal sleeve splice repair with some limiting factors.
Show less
Date Issued: 1999
PURL: http://purl.flvc.org/fcla/dt/15721
Subject Headings: Fiber reinforced plastics, Concrete--Environmental testing, Prestressed concrete construction--Maintenance and repair
Format: Document (PDF)

Fiber reinforced plastics (13)	+ -
Reinforced concrete, Fiber (6)	+ -
Reinforced concrete (5)	+ -
Columns, Concrete (3)	+ -
Fiber-reinforced concrete--Testing (3)	+ -

Prestressed concrete construction (3)	+ -
Carbon fibers (2)	+ -
Concrete piling (2)	+ -
Concrete--Environmental testing (2)	+ -
Prestressed concrete (2)	+ -
Tensile Strength (2)	+ -
ANSYS (Computer system) (1)	+ -
Adhesive joints (1)	+ -
Bridges, Concrete (1)	+ -
Bridges, Concrete--Floors (1)	+ -
Bridges, Iron and steel (1)	+ -
Bridges--Design and construction (1)	+ -
Bridges--Fatigue (1)	+ -
Buildings--Repair and reconstruction (1)	+ -
Carbon composites (1)	+ -
Cement composites (1)	+ -
Cement composites. (1)	+ -
Composite construction (1)	+ -
Composite materials (1)	+ -
Composite materials--Effect of environment on (1)	+ -
Composites (1)	+ -
Concrete (1)	+ -
Concrete beams (1)	+ -
Concrete beams--Fatigue (1)	+ -
Concrete walls--Design and construction (1)	+ -

Florida Atlantic University (25)	+ -
College of Engineering and Computer Science (20)	+ -
Arockiasamy, Madasamy (16)	+ -
Department of Ocean and Mechanical Engineering (15)	+ -
Department of Civil, Environmental and Geomatics Engineering (5)	+ -

Presuel-Moreno, Francisco (5)	+ -
Reddy, Dronnadula V. (4)	+ -
Baker, William Arnold. (1)	+ -
Chidambaram, Senthilkumar. (1)	+ -
Ellis, Spencer G. (1)	+ -
Flaherty, Ryan (1)	+ -
Gemmell, Thomas Scott. (1)	+ -
Germain, Gerson S. (1)	+ -
Gervois, Gonzague. (1)	+ -
JEANFREAU, JAMES JOSEPH, JR. (1)	+ -
Kabaluk, Maksim (1)	+ -
Kanneganti, Srikanth. (1)	+ -
Manav, Mukbil Ozan. (1)	+ -
NOMIKOS, GEORGE GERASSIMOS. (1)	+ -
Numa, Roody. (1)	+ -
Parkinson, Jacqueline Cecile (1)	+ -
Potturu, Rama Kumar. (1)	+ -
Qiao, Pizhong. (1)	+ -
Qu, Rong. (1)	+ -
Raghavachary, Sowrirajan. (1)	+ -
Sandepudi, Krishna Srinivasa. (1)	+ -
Santillan Barragan, Ingrid Susana (1)	+ -
Thayer, Chad C. (1)	+ -
Trotsek, Dylan (1)	+ -
Vogel, Dietrich H. (1)	+ -

Search In

Pages

Pages

Sort Results By:

Narrow results by:

Collection

Topical Subject

Genre

Type of Resource

Language

Creator

Format

Owner