Current Search: Graphite fibers (x)
View All Items
- Title
- Electrochemical double-layer capacitors utilizing low surface area graphite fibers.
- Creator
- Zawacki, David Isaiah., Florida Atlantic University, Lipka, Stephen M., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
- Abstract/Description
-
Electrochemical double-layer capacitors were constructed using low surface area carbon fibers that are commercially available. The fibers were made from polyacrylonitrile (PAN) and pitch and vary from low (LC = 14A, d002 = 3.54A) to high (LC = 169A, d002 = 3.40A) crystallinity. High energy densities (up to 7.83 Wh/kg) were obtained by electrochemically intercalating HSO4- ions between the graphene planes of the carbon fibers. The intercalation process was strongly influenced by the...
Show moreElectrochemical double-layer capacitors were constructed using low surface area carbon fibers that are commercially available. The fibers were made from polyacrylonitrile (PAN) and pitch and vary from low (LC = 14A, d002 = 3.54A) to high (LC = 169A, d002 = 3.40A) crystallinity. High energy densities (up to 7.83 Wh/kg) were obtained by electrochemically intercalating HSO4- ions between the graphene planes of the carbon fibers. The intercalation process was strongly influenced by the crystallinity of the carbon fiber and by the precursors from which the fiber was manufactured. All the pitch fibers had a higher structural order and a higher carbon content than the PAN fibers. A total of 10 capacitors were constructed. Nine of these were constructed from fibers that were electrochemically activated and one was constructed from fiber as received. 38 w/o sulfuric acid was used as the electrolyte for each of these capacitors. Performance of the capacitors decreased as the structural order and carbon content of the fibers decreased.
Show less - Date Issued
- 1997
- PURL
- http://purl.flvc.org/fcla/dt/15427
- Subject Headings
- Capacitors, Electric double layer, Graphite fibers
- Format
- Document (PDF)
- Title
- Carbon fiber/vinylester composites in the marine environment: EIS as a means of determining an effective composite interface.
- Creator
- Vinci, Chris J., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
- Abstract/Description
-
In this research, the degradation of carbon fiber/vinylester composites in marine environments was experimentally investigated. Additionally, two types of carbon fiber surface treatments, namely Polyhedral Oligomeric Silsesquioxane (POSS) and the industrial surface treatment F0E, were evaluated to determine their effectiveness in creating a fiber/matrix (F/M) interface for use in the marine environment. Electrochemical Impedance Spectroscopy (EIS) was explored as a new application of an...
Show moreIn this research, the degradation of carbon fiber/vinylester composites in marine environments was experimentally investigated. Additionally, two types of carbon fiber surface treatments, namely Polyhedral Oligomeric Silsesquioxane (POSS) and the industrial surface treatment F0E, were evaluated to determine their effectiveness in creating a fiber/matrix (F/M) interface for use in the marine environment. Electrochemical Impedance Spectroscopy (EIS) was explored as a new application of an existing technique for use in measuring the amount of water at the F/M interface in carbon fiber/vinylester composites. EIS spectra were used to determine equivalent electric circuit models that allow for the prediction of water at the interface. The location of water within the composite was determined through Positron Annihilation Lifetime Spectroscopy (PALS). Interlaminar shear strength and transverse tensile tests were carried out for dry conditions and after hygrothermal exposure of the composites to study the influence of the integrity of the F/M interface on the macroscopic response of the composite.
Show less - Date Issued
- 2010
- PURL
- http://purl.flvc.org/FAU/1930500
- Subject Headings
- Composite materials, Mechanical properties, Graphite fibers, Fibrous composites, Structural analysis
- Format
- Document (PDF)
- Title
- Degradation of mechanical properties of vinylester and carbon fiber/vinylester composites due to environmental exposure.
- Creator
- Figliolini, Alexander M., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
- Abstract/Description
-
An experimental investigation was undertaken to determine the effects of marine environmental exposure on the mechanical properties of vinylester resins (VE510A and VE8084) and carbon fiber/VE510A vinylester composites. The effect of carbon fiber sizing on the composite strengths was also examined. Neat resins were exposed to marine environments until moisture content reached a point of saturation after which they were tested in tension, compression and shear. Compared to the baseline dry...
Show moreAn experimental investigation was undertaken to determine the effects of marine environmental exposure on the mechanical properties of vinylester resins (VE510A and VE8084) and carbon fiber/VE510A vinylester composites. The effect of carbon fiber sizing on the composite strengths was also examined. Neat resins were exposed to marine environments until moisture content reached a point of saturation after which they were tested in tension, compression and shear. Compared to the baseline dry specimens, specimens subjected to moisture showed overall increased ductility and a reduction in strength. Dry and moisture saturated composite specimens were tested in tension and compression in different orientations. Longitudinal specimens were tested in in-plane shear and interlaminar shear. Composites with F-sized carbon fibers displayed overall higher strength than those with G-sized fibers at both dry and moisture saturated conditions. An analysis of moisture absorption of the composites was performed which vii shows that the moisture up-take is dominated by the fiber/matrix region which absorbs up to 90% of the moisture. The composites experienced reduced strength after moisture absorption. The results revealed that the fiber sizing has stronger effect on the fiber/matrix interface dominated strengths than moisture up-take.
Show less - Date Issued
- 2011
- PURL
- http://purl.flvc.org/FAU/3332182
- Subject Headings
- Composite materials, Mechanical properties, Polymers, Deterioration, FIbrous composites, Graphite fibers
- Format
- Document (PDF)
- Title
- Degradation of the composite fiber/matrix interface in marine environment.
- Creator
- Farooq, Muhammad Umar., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
- Abstract/Description
-
Durability of the composite materials in marine environments has been investigated experimentally and with analytical and numerical methods. The main focus of this study is on the integrity of the fiber/matrix interface under seawater exposure. A single-fiber compression test specimen called the Outwater-Murphy (OM) test has been analyzed using mechanics of materials principles and linear elastic fracture mechanics. Sizing of the OM specimen was conducted so that debonding of the fiber from...
Show moreDurability of the composite materials in marine environments has been investigated experimentally and with analytical and numerical methods. The main focus of this study is on the integrity of the fiber/matrix interface under seawater exposure. A single-fiber compression test specimen called the Outwater-Murphy (OM) test has been analyzed using mechanics of materials principles and linear elastic fracture mechanics. Sizing of the OM specimen was conducted so that debonding of the fiber from the interface should be achieved prior to yielding of the matrix and global instability failure. Stress analysis of the OM specimen has been conducted from theory of elasticity and finite element analysis. A superelement technique was developed for detailed analysis of the stress state at the fiber/matrix interface. The interface stress state at the debond site in the OM specimen, i.e. at the hole edge, was identified as biaxial tension at the fiber/matrix interface. Characterization of cure and post-cure of 8084 and 510A vinlyester resins has been performed using cure shrinkage tests based on dynamic mechanical analysis and coated beam experiments. In addition, moisture absorption, swelling and the influence of moisture on the mechanical properties of the resins were determined. Testing of OM specimens consisting of a single carbon or glass fiber embedded in vinylester resin at dry conditions and after seawater exposure revealed that the debond toughness was substantially reduced after exposure of the OM specimen to seawater. C(F) did not debond. Macroscopic carbon/vinylester woven composites where the fibers were sized with F sizing were tested in shear at dry conditions and after four weeks of seawater exposure. The shear strength was very little affected after the short immersion time.
Show less - Date Issued
- 2009
- PURL
- http://purl.flvc.org/FAU/228774
- Subject Headings
- Fibrous composites, Graphite fibers, Composite materials, Mechanical properties, Polymers, Deterioration
- Format
- Document (PDF)