View All Items

Title: PRESSURE FLUCTUATION MEASUREMENT TECHNIQUES IN A CIRCULAR DUCT WITH INCOMPRESSIBLE TURBULENT FLOW (FREQUENCY-WAVENUMBER SPECTRA).
Creator: DAVIS, HARRY LEE., Florida Atlantic University, Cuschieri, Joseph M.
Abstract/Description: Turbulent pressure fluctuations and acoustical shock waves formed at pipe discontinuities are the primary source of flow noise. fhe pipe response is excited by the fluctuating forces associated with the turbulent pressure fluctuations. The forcing functions can be determined from the frequency-wavenumber spectrum of the pressure fluctuations. A procedure is developed here to obtain the frequency-wavenumber spectrum due to fully developed turbulent flow. The data analysis procedures developed...
Show moreTurbulent pressure fluctuations and acoustical shock waves formed at pipe discontinuities are the primary source of flow noise. fhe pipe response is excited by the fluctuating forces associated with the turbulent pressure fluctuations. The forcing functions can be determined from the frequency-wavenumber spectrum of the pressure fluctuations. A procedure is developed here to obtain the frequency-wavenumber spectrum due to fully developed turbulent flow. The data analysis procedures developed in this study to analyze the pressure fluctuations provide a good means to determine the frequency-wavenumber spectrum and represent this data in a clear form. Frequency-wavenumber spectra have been obtained for simulated pressure data. In the experimental system designed to collect turbulent pressure data, it was determined that a recessed transducer configuration cannot be used in water pipe flow turbulent pressure fluctuation studies because of the enhanced turbulence created by the upstream holes. Therefore, flush mounted transducers are required.
Show less
Date Issued: 1986
PURL: http://purl.flvc.org/fcla/dt/14330
Subject Headings: Turbulence--Measurement, Fluid dynamics
Format: Document (PDF)

Title: Predicting the flow & noise of a rotor in a turbulent boundary layer using an actuator disk – Rans approach.
Creator: Buono, Armand C., Glegg, Stewart A. L., Florida Atlantic University, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: The numerical method presented in this study attempts to predict the mean, non-uniform flow field upstream of a propeller partially immersed in a thick turbulent boundary layer with an actuator disk using CFD based on RANS in ANSYS FLUENT. Three different configurations, involving an infinitely thin actuator disk in the freestream (Configuration 1), an actuator disk near a wall with a turbulent boundary layer (Configuration 2), and an actuator disk with a hub near a wall with a turbulent...
Show moreThe numerical method presented in this study attempts to predict the mean, non-uniform flow field upstream of a propeller partially immersed in a thick turbulent boundary layer with an actuator disk using CFD based on RANS in ANSYS FLUENT. Three different configurations, involving an infinitely thin actuator disk in the freestream (Configuration 1), an actuator disk near a wall with a turbulent boundary layer (Configuration 2), and an actuator disk with a hub near a wall with a turbulent boundary layer (Configuration 3), were analyzed for a variety of advance ratios ranging from J = 0.48 to J =1.44. CFD results are shown to be in agreement with previous works and validated with experimental data of reverse flow occurring within the boundary layer above the flat plate upstream of a rotor in the Virginia Tech’s Stability Wind Tunnel facility. Results from Configuration 3 will be used in future aero-acoustic computations.
Show less
Date Issued: 2014
PURL: http://purl.flvc.org/fau/fd/FA00004269, http://purl.flvc.org/fau/fd/FA00004269
Subject Headings: Aeroelasticity, Computational fluid dynamics, Fluid dynamic measurements, Fluid mechanics -- Mathematical models, Turbomachines -- Fluid dynamics, Turbulence -- Mathematical models
Format: Document (PDF)

Title: Detection, localization, and identification of bearings with raceway defect for a dynamometer using high frequency modal analysis of vibration across an array of accelerometers.
Creator: Waters, Nicholas., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: This thesis describes a method to detect, localize and identify a faulty bearing in a rotating machine using narrow band envelope analysis across an array of accelerometers. This technique is developed as part of the machine monitoring system of an ocean turbine. A rudimentary mathematical model is introduced to provide an understanding of the physics governing the vibrations caused by a bearing with a raceway defect. This method is then used to detect a faulty bearing in two setups : on a...
Show moreThis thesis describes a method to detect, localize and identify a faulty bearing in a rotating machine using narrow band envelope analysis across an array of accelerometers. This technique is developed as part of the machine monitoring system of an ocean turbine. A rudimentary mathematical model is introduced to provide an understanding of the physics governing the vibrations caused by a bearing with a raceway defect. This method is then used to detect a faulty bearing in two setups : on a lathe and in a dynamometer.
Show less
Date Issued: 2012
PURL: http://purl.flvc.org/FAU/3359156
Subject Headings: Marine turbines, Mathematical models, Vibration, Measurement, Fluid dynamics, Dynamic testing
Format: Document (PDF)

Title: Rapid distortion theory for rotor inflows.
Creator: Kawashima, Emilia, Glegg, Stewart A. L., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: For aerospace and naval applications where low radiated noise levels are a requirement, rotor noise generated by inflow turbulence is of great interest. Inflow turbulence is stretched and distorted as it is ingested into a thrusting rotor which can have a significant impact on the noise source levels. This thesis studies the distortion of subsonic, high Reynolds number turbulent flow, with viscous effects ignored, that occur when a rotor is embedded in a turbulent boundary layer. The analysis...
Show moreFor aerospace and naval applications where low radiated noise levels are a requirement, rotor noise generated by inflow turbulence is of great interest. Inflow turbulence is stretched and distorted as it is ingested into a thrusting rotor which can have a significant impact on the noise source levels. This thesis studies the distortion of subsonic, high Reynolds number turbulent flow, with viscous effects ignored, that occur when a rotor is embedded in a turbulent boundary layer. The analysis is based on Rapid Distortion Theory (RDT), which describes the linear evolution of turbulent eddies as they are stretched by a mean flow distortion. Providing that the gust does not distort the mean flow streamlines the solution for a mean flow with shear is found to be the same as the solution for a mean potential flow with the addition of a potential flow gust. By investigating the inflow distortion of small-scale turbulence for various simple flows and rotor inflows with weak shear, it is shown that RDT can be applied to incompressible shear flows to determine the flow distortion. It is also shown that RDT can be applied to more complex flows modeled by the Reynolds Averaged Navier Stokes (RANS) equations.
Show less
Date Issued: 2013
PURL: http://purl.flvc.org/fau/fd/FA0004030
Subject Headings: Computational fluid dynamics, Fluid dynamic measurements, Fluid mechanics -- Mathematical models, Turbulence -- Computer simulation, Turbulence -- Mathematical models
Format: Document (PDF)

Title: Far-Field Noise From a Rotor in a Wind Tunnel.
Creator: Grant, Justin Alexander, Glegg, Stewart A. L., Florida Atlantic University, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: This project is intended to demonstrate the current state of knowledge in the prediction of the tonal and broadband noise radiation from a Sevik rotor. The rotor measurements were made at the Virginia Tech Stability Wind Tunnel. Details of the rotor noise and flow measurements were presented by Wisda et al(2014) and Murray et al(2015) respectively. This study presents predictions based on an approach detailed by Glegg et al(2015) for the broadband noise generated by a rotor in an...
Show moreThis project is intended to demonstrate the current state of knowledge in the prediction of the tonal and broadband noise radiation from a Sevik rotor. The rotor measurements were made at the Virginia Tech Stability Wind Tunnel. Details of the rotor noise and flow measurements were presented by Wisda et al(2014) and Murray et al(2015) respectively. This study presents predictions based on an approach detailed by Glegg et al(2015) for the broadband noise generated by a rotor in an inhomogeneous flow, and compares them to measured noise radiated from the rotor at prescribed observer locations. Discrepancies between the measurements and predictions led to comprehensive study of the flow in the wind tunnel and the discovery of a vortex upstream of the rotor at low advance ratios. The study presents results of RANS simulations. The static pressure and velocity profile in the domain near the rotor's tip gap region were compared to measurements obtained from a pressure port array and a PIV visualization of the rotor in the wind tunnel.
Show less
Date Issued: 2015
PURL: http://purl.flvc.org/fau/fd/FA00004501, http://purl.flvc.org/fau/fd/FA00004501
Subject Headings: Aerodynamic noise, Computational fluid dynamics, Fluid dynamic measurement, Fluid mechanics -- Mathematical models, Fluid structure interactioin, Turbomachines -- Fluid dynamics, Turbulence -- Mathematical models, Unsteady flow (Fluid dynamics)
Format: Document (PDF)

Title: Evaluation of motion compensated ADV measurements for quantifying velocity fluctuations.
Creator: Lovenbury, James William., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: This study assesses the viability of using a towfish mounted ADV for quantifying water velocity fluctuations in the Florida Current relevant to ocean current turbine performance. For this study a motion compensated ADV is operated in a test flume. Water velocity fluctuations are generated by a 1.3 cm pipe suspended in front of the ADV at relative current speeds of 0.9 m/s and 0.15 m/s, giving Reynolds numbers on the order of 1000. ADV pitching motion of +/- 2.5 [degree] at 0.3 Hz and a heave...
Show moreThis study assesses the viability of using a towfish mounted ADV for quantifying water velocity fluctuations in the Florida Current relevant to ocean current turbine performance. For this study a motion compensated ADV is operated in a test flume. Water velocity fluctuations are generated by a 1.3 cm pipe suspended in front of the ADV at relative current speeds of 0.9 m/s and 0.15 m/s, giving Reynolds numbers on the order of 1000. ADV pitching motion of +/- 2.5 [degree] at 0.3 Hz and a heave motion of 0.3 m amplitude at 0.2 Hz are utilized to evaluate the motion compensation approach. The results show correction for motion provides up to an order of magnitude reduction in turbulent kinetic energy at frequencies of motion while the IMU is found to generate 2% error at 1/30 Hz and 9% error at 1/60 Hz in turbulence intensity.
Show less
Date Issued: 2013
PURL: http://purl.flvc.org/fcla/dt/3362482
Subject Headings: Motion control systems, Fluid dynamic measurements, Fluid mechanics, Mathematical models, Analysis of covariance
Format: Document (PDF)

Title: Vibration analysis for ocean turbine reliability models.
Creator: Wald, Randall David., College of Engineering and Computer Science, Department of Computer and Electrical Engineering and Computer Science
Abstract/Description: Submerged turbines which harvest energy from ocean currents are an important potential energy resource, but their harsh and remote environment demands an automated system for machine condition monitoring and prognostic health monitoring (MCM/PHM). For building MCM/PHM models, vibration sensor data is among the most useful (because it can show abnormal behavior which has yet to cause damage) and the most challenging (because due to its waveform nature, frequency bands must be extracted from...
Show moreSubmerged turbines which harvest energy from ocean currents are an important potential energy resource, but their harsh and remote environment demands an automated system for machine condition monitoring and prognostic health monitoring (MCM/PHM). For building MCM/PHM models, vibration sensor data is among the most useful (because it can show abnormal behavior which has yet to cause damage) and the most challenging (because due to its waveform nature, frequency bands must be extracted from the signal). To perform the necessary analysis of the vibration signals, which may arrive rapidly in the form of data streams, we develop three new wavelet-based transforms (the Streaming Wavelet Transform, Short-Time Wavelet Packet Decomposition, and Streaming Wavelet Packet Decomposition) and propose modifications to the existing Short-TIme Wavelet Transform. ... The proposed algorithms also create and select frequency-band features which focus on the areas of the signal most important to MCM/PHM, producing only the information necessary for building models (or removing all unnecessary information) so models can run on less powerful hardware. Finally, we demonstrate models which can work in multiple environmental conditions. ... Our results show that many of the transforms give similar results in terms of performance, but their different properties as to time complexity, ability to operate in a fully streaming fashion, and number of generated features may make some more appropriate than others in particular applications, such as when streaming data or hardware limitations are extremely important (e.g., ocean turbine MCM/PHM).
Show less
Date Issued: 2012
PURL: http://purl.flvc.org/FAU/3359158
Subject Headings: Marine turbines, Mathematical models, Fluid dynamics, Structural dynamics, Vibration, Measurement, Stochastic processes
Format: Document (PDF)

Title: Numerical Simulation of an Ocean Current Turbine Operating in a Wake Field.
Creator: Pyakurel, Parakram, VanZwieten, James H., Dhanak, Manhar R., Florida Atlantic University, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: An Ocean Current Turbine (OCT) numerical simulation for creating, testing and tuning flight and power takeoff controllers, as well as for farm layout optimization is presented. This simulation utilizes a novel approach for analytically describing oceanic turbulence. This approach has been integrated into a previously developed turbine simulation that uses unsteady Blade Element Momentum theory. Using this, the dynamical response and power production of a single OCT operating in ambient...
Show moreAn Ocean Current Turbine (OCT) numerical simulation for creating, testing and tuning flight and power takeoff controllers, as well as for farm layout optimization is presented. This simulation utilizes a novel approach for analytically describing oceanic turbulence. This approach has been integrated into a previously developed turbine simulation that uses unsteady Blade Element Momentum theory. Using this, the dynamical response and power production of a single OCT operating in ambient turbulence is quantified. An approach for integrating wake effects into this single device numerical simulation is presented for predicting OCT performance within a farm. To accomplish this, far wake characteristics behind a turbine are numerically described using analytic expressions derived from wind turbine wake models. These expressions are tuned to match OCT wake characteristics calculated from CFD analyses and experimental data. Turbine wake is characterized in terms of increased turbulence intensities and decreased mean wake velocities. These parameters are calculated based on the performance of the upstream OCT and integrated into the environmental models used by downstream OCT. Simulation results are presented that quantify the effects of wakes on downstream turbine performance over a wide range of relative downstream and cross stream locations for both moored and bottom mounted turbine systems. This is done to enable the development and testing of flight and power takeoff controllers designed for maximizing energy production and reduce turbine loadings.
Show less
Date Issued: 2016
PURL: http://purl.flvc.org/fau/fd/FA00004737, http://purl.flvc.org/fau/fd/FA00004737
Subject Headings: Turbulence--Mathematical models., Marine turbines--Mathematical models., Wind turbines--Aerodynamics--Mathematical models., Structural dynamics., Computational fluid dynamics., Fluid dynamic measurements., Atmospheric circulation.
Format: Document (PDF)

Title: Spectral evaluation of motion compensated adv systems for ocean turbulence measurements.
Creator: Egeland, Matthew Nicklas, von Ellenrieder, Karl, VanZwieten, James H., Florida Atlantic University, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: A motion compensated ADV system was evaluated to determine its ability to make measurements necessary for characterizing the variability of the ambient current in the Gulf Stream. The impact of IMU error relative to predicted turbulence spectra was quantified, as well as and the ability of the motion compensation approach to remove sensor motion from the ADV measurements. The presented data processing techniques are shown to allow the evaluated ADV to be effectively utilized for quantifying...
Show moreA motion compensated ADV system was evaluated to determine its ability to make measurements necessary for characterizing the variability of the ambient current in the Gulf Stream. The impact of IMU error relative to predicted turbulence spectra was quantified, as well as and the ability of the motion compensation approach to remove sensor motion from the ADV measurements. The presented data processing techniques are shown to allow the evaluated ADV to be effectively utilized for quantifying ambient current fluctuations from 0.02 to 1 Hz (50 to 1 seconds) for dissipation rates as low as 3x10-7. This measurement range is limited on the low frequency end by IMU error, primarily by the calculated transformation matrix, and on the high end by Doppler noise. Inshore testing has revealed a 0.37 Hz oscillation inherent in the towfish designed and manufactured as part of this project, which can nearly be removed using the IMU.
Show less
Date Issued: 2014
PURL: http://purl.flvc.org/fau/fd/FA00004191, http://purl.flvc.org/fau/fd/FA00004191
Subject Headings: Fluid dynamic measurements, Fluid mechanics -- Mathematical models, Motion control systems, Ocean atmosphere interaction, Ocean circulation, Turbulence, Wave motion, Theory of
Format: Document (PDF)

Title: Oceanic-Atmospheric Influences on Streamflow Extremes & Characteristics in Southeastern United States.
Creator: Carpenter, Andrea, Teegavarapu, Ramesh, Florida Atlantic University, College of Engineering and Computer Science, Department of Civil, Environmental and Geomatics Engineering
Abstract/Description: Comprehensive evaluation of changes in streamflow extremes and characteristics due to climate change and variability is the main focus of this study. Available streamflow data at several gaging stations in least anthropologically affected watersheds of the Southeastern Gulf-Atlantic Region, were used for this analysis. To evaluate influences due to climate change, nonparametric trend tests were applied to annual and monthly extremes, while considering seasonality, along with changes in...
Show moreComprehensive evaluation of changes in streamflow extremes and characteristics due to climate change and variability is the main focus of this study. Available streamflow data at several gaging stations in least anthropologically affected watersheds of the Southeastern Gulf-Atlantic Region, were used for this analysis. To evaluate influences due to climate change, nonparametric trend tests were applied to annual and monthly extremes, while considering seasonality, along with changes in streamflow characteristics. To understand climate variability influences, streamflow data is partitioned in to cool and warm phases of four oceanic and atmospheric oscillations known to have an effect on hydroloclimatology of the region: El Niño-Southern Oscillation (ENSO), Pacific Decadal Oscillation (PDO); Atlantic Multi-decadal Oscillation (AMO); and North Atlantic Oscillation (NAO). Generally, results showed decreasing trends in overall streamflow extremes, as well as spatially varying, temporally non-uniform influences of climate variability on streamflow extremes and characteristics.
Show less
Date Issued: 2016
PURL: http://purl.flvc.org/fau/fd/FA00004766, http://purl.flvc.org/fau/fd/FA00004766
Subject Headings: Atmospheric physics--Statistical models., Atmospheric thermodynamics., Fluid dynamics., Stream measurements.
Format: Document (PDF)

Title: Wave Ship Interaction in Transforming Seas.
Creator: Gong, Fuxian, Dhanak, Manhar R., Florida Atlantic University, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: In near-shore transforming seas, as waves approach the shoreline, wave shoaling and sometimes wave breaking take place due to the decreasing water depth. When a ship advances through the transforming seas, the ship body and waves interact with each other substantially and can lead to unknown motions of the ship hull. The physical process of how the wave transforms in the surf zone and how the vehicle actually behaves when it passes through the transforming seas is a complicated issue that...
Show moreIn near-shore transforming seas, as waves approach the shoreline, wave shoaling and sometimes wave breaking take place due to the decreasing water depth. When a ship advances through the transforming seas, the ship body and waves interact with each other substantially and can lead to unknown motions of the ship hull. The physical process of how the wave transforms in the surf zone and how the vehicle actually behaves when it passes through the transforming seas is a complicated issue that triggers considerable research interest. The goal of my research is to characterize the dynamics of a high-speed surface ship model in transforming seas through a parametric numerical study of the shipwave interactions. In this study, the vehicle of interest is a surface effect ship (SES) and we aim to contribute to developing a methodology for simulating the transforming wave environment, including wave breaking, and its interactions with the SES. The thesis work uses a commercial software package ANSYS Fluent to generate numerical waves and model the interface between water and air using the volume of fluid (VoF) method. A ship motion solver and the dynamic mesh are used to enable the modeled ship to perform three degree-of-freedom (DoF) motion and the near-region of the ship hull to deform as well as re-mesh. Non-conformal meshes with hybrid compositions of different cell types and various grid sizes are used in the simulations for different purposes. Five user-defined functions (UDFs) are dynamically linked with the flow solver to incorporates ship/grid motions, wave damping and output of the numerical results. A series of steps were taken sequentially: 1) validation for ship motions including simulation of a static Wigley hull under steady flows to compare against previous experimental results by other researchers, and the comparison between the static SES model under steady flows and the moving SES model advancing in the calm water; 2) study of the ship with 3 DoF advancing in calm water of both constant depth and varying depth; 3) validation for numerical waves, including predictions of numerically progressive waves in both a regular tank and a tank with a sloped fringing reef to compare with theoretical and experimental results, respectively; 4) investigation of the transforming characteristics of the wave traveling over the sloped fringing reef, which mimics the near-shore wave environment and a study of the dynamics of the SES through transforming waves. We find that the flow solver used in this study reliably models the wave profiles along the ship hull. The comparison between a static SES in a current and a moving SES in calm water at the same Froude number shows that although the velocity fields around the vehicle are significantly different, the wave profiles inside and outside the rigid cushion of the vehicle are similar and the resistance force experienced by the vehicle in the two scenarios agree well over time. We conducted five numerical simulations of the vehicle traveling from shallow water to deep water across the transition zone for different Froude numbers. From the results, we find that as the Froude number increases, the wave resistance force on the vehicle becomes larger in both shallow water and deep water. In addition, the overall mean resistance force experienced by the vehicle over the whole trip increases with the Froude number. Statistical analysis of the wave motions suggests that the energy flux decreases dramatically in the onshore direction as the waves break. The more severe the wave-breaking process, the greater the decrease in energy flux. Both the increase of Froude number and the wave steepness apparently increase the resistance force on the vehicle in the shallow water. This thesis work captures the impact of the transforming characteristics of the waves and closely replicates the behavior of how waves interact with a ship in transforming seas through numerical modeling and simulation.
Show less
Date Issued: 2017
PURL: http://purl.flvc.org/fau/fd/FA00004916, http://purl.flvc.org/fau/fd/FA00004916
Subject Headings: Hydrodynamics--Mathematical models., Fluid dynamics--Mathematical models., Ocean waves--Measurement., Water waves--Measurement., Coastal engineering.
Format: Document (PDF)

Title: Transport and dispersion of fire extinguishing agents downstream from clutter elements of aircraft engine nacelles.
Creator: Zbeeb, Khaled., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: The combination of highly turbulent airflow, flammable fluids, and numerous ignition sources makes aircraft engine nacelles a difficult fire zone to protect. Better understanding of nacelle air flow and how it influences the spread of fires and fire extinguishing agents is needed to improve the efficiency of fire suppression. The first objective was to establish a CFD model for a flow field test section to analyze the transport and dispersion of fire extinguishing agents in the presence of...
Show moreThe combination of highly turbulent airflow, flammable fluids, and numerous ignition sources makes aircraft engine nacelles a difficult fire zone to protect. Better understanding of nacelle air flow and how it influences the spread of fires and fire extinguishing agents is needed to improve the efficiency of fire suppression. The first objective was to establish a CFD model for a flow field test section to analyze the transport and dispersion of fire extinguishing agents in the presence of various clutter elements. To validate the use of the CFD model, the simulation results of the CFD model were compared to the experimental data and they show an agreement with the experimental data. The second objective was to present parametric studies to show the effects of the coflow speed, turbulence intensity and agent droplet size on the transport and dispersion of the agent particles downstream from the clutter elements.
Show less
Date Issued: 2009
PURL: http://purl.flvc.org/FAU/186687
Subject Headings: Airplanes, Nacelles, Safety measures, Airplanes, Fires and fire prevention, Fire extinguishing agents, Testing, Airplanes, Fluid dynamics, Mathematical models
Format: Document (PDF)

Title: Some corrosion problems associated with underwater turbines.
Creator: Miglis, Yohann., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: This thesis deals with corrosion problems of underwater turbines in marine environment. The effect of a tensile stress on the uniform corrosion rate of a metal bar is studied, and an analytical model predicting the time of service of a bar under a tensile load in a corrosive environment is proposed. Stress corrosion relationships are provided for different type of alloys, and different types of relationships. Dolinskii's and Gutman's models are studied and extended to a general order...
Show moreThis thesis deals with corrosion problems of underwater turbines in marine environment. The effect of a tensile stress on the uniform corrosion rate of a metal bar is studied, and an analytical model predicting the time of service of a bar under a tensile load in a corrosive environment is proposed. Stress corrosion relationships are provided for different type of alloys, and different types of relationships. Dolinskii's and Gutman's models are studied and extended to a general order polynomial, along with a Least Square and Spline Interpolation of the experimental data. In a second part, the effect of the passive film, delaying the initiation of the corrosion process, is studied. Finally, an algorithm predicting the time of service of a cracked bar is provided, using the stress corrosion assumption, along with a validation using experimental data.
Show less
Date Issued: 2012
PURL: http://purl.flvc.org/FAU/3342238
Subject Headings: Turbines, Stress corrosion, Testing, Computational fluid dynamics, Stress corrosion, Fracture mechanics, Measurement, Alloys, Stress corrosion, Testing, Alloys, Corrosion fatigue, Testing
Format: Document (PDF)

Computational fluid dynamics (4)	+ -
Fluid dynamic measurements (4)	+ -
Fluid dynamics (4)	+ -
Fluid mechanics -- Mathematical models (4)	+ -
Mathematical models (4)	+ -

Measurement (3)	+ -
Turbulence -- Mathematical models (3)	+ -
Marine turbines (2)	+ -
Motion control systems (2)	+ -
Testing (2)	+ -
Turbomachines -- Fluid dynamics (2)	+ -
Vibration (2)	+ -
Aerodynamic noise (1)	+ -
Aeroelasticity (1)	+ -
Airplanes (1)	+ -
Alloys (1)	+ -
Analysis of covariance (1)	+ -
Atmospheric circulation. (1)	+ -
Atmospheric physics--Statistical models. (1)	+ -
Atmospheric thermodynamics. (1)	+ -
Coastal engineering. (1)	+ -
Computational fluid dynamics. (1)	+ -
Corrosion fatigue (1)	+ -
Dynamic testing (1)	+ -
Fire extinguishing agents (1)	+ -
Fires and fire prevention (1)	+ -
Fluid dynamic measurement (1)	+ -
Fluid dynamic measurements. (1)	+ -
Fluid dynamics--Mathematical models. (1)	+ -
Fluid dynamics. (1)	+ -

College of Engineering and Computer Science (12)	+ -
Department of Ocean and Mechanical Engineering (10)	+ -
Florida Atlantic University (7)	+ -
Glegg, Stewart A. L. (3)	+ -
Dhanak, Manhar R. (2)	+ -

VanZwieten, James H. (2)	+ -
Buono, Armand C. (1)	+ -
Carpenter, Andrea (1)	+ -
Cuschieri, Joseph M. (1)	+ -
DAVIS, HARRY LEE. (1)	+ -
Department of Civil, Environmental and Geomatics Engineering (1)	+ -
Department of Computer and Electrical Engineering and Computer Science (1)	+ -
Egeland, Matthew Nicklas (1)	+ -
Gong, Fuxian (1)	+ -
Grant, Justin Alexander (1)	+ -
Kawashima, Emilia (1)	+ -
Lovenbury, James William. (1)	+ -
Miglis, Yohann. (1)	+ -
Pyakurel, Parakram (1)	+ -
Teegavarapu, Ramesh (1)	+ -
Wald, Randall David. (1)	+ -
Waters, Nicholas. (1)	+ -
Zbeeb, Khaled. (1)	+ -
von Ellenrieder, Karl (1)	+ -

Search In

Sort Results By:

Narrow results by:

Collection

Topical Subject

Genre

Type of Resource

Language

Creator

Format

Owner