You are here
STATIC STRESS ANALYSIS OF CHAIN LINKS USING A FINITE-ELEMENT METHOD
- Date Issued:
- 1980
- Summary:
- A static stress analysis of a common chain link and a pear-shaped nng ivas performed using the finite element structural analysis program SAP IV. The required finite element mesh and loading inputs were generated by the pre-processing program PRE-SAP- LINK. This procedure was used to determine the midplane stresses and displacements in a link and ring of typical sizes and subject to concentrated fcrces. Stress distributions and displacements were drawn by hand and by using a Tektronix 4662 Interactive Digital Plotter, respectively. The results obtained show that for both link and ring, the numerically largest principal stress and maximum in-plane shear stress occur on the element directly under an applied load . The entire procedure was verified by comparing the results obtained for the common link with experimental results in the literature and with analytical results obtained using a mechanics of materials approach. All of the results were in close agreement.
Title: | STATIC STRESS ANALYSIS OF CHAIN LINKS USING A FINITE-ELEMENT METHOD. |
259 views
45 downloads |
---|---|---|
Name(s): |
TSENG, HUAN-SHOO HANS. Florida Atlantic University, Degree grantor Stevens, Karl K., Thesis advisor College of Engineering and Computer Science Department of Ocean and Mechanical Engineering |
|
Type of Resource: | text | |
Genre: | Electronic Thesis Or Dissertation | |
Issuance: | monographic | |
Date Issued: | 1980 | |
Publisher: | Florida Atlantic University | |
Place of Publication: | Boca Raton, Fla. | |
Physical Form: | application/pdf | |
Extent: | 67 p. | |
Language(s): | English | |
Summary: | A static stress analysis of a common chain link and a pear-shaped nng ivas performed using the finite element structural analysis program SAP IV. The required finite element mesh and loading inputs were generated by the pre-processing program PRE-SAP- LINK. This procedure was used to determine the midplane stresses and displacements in a link and ring of typical sizes and subject to concentrated fcrces. Stress distributions and displacements were drawn by hand and by using a Tektronix 4662 Interactive Digital Plotter, respectively. The results obtained show that for both link and ring, the numerically largest principal stress and maximum in-plane shear stress occur on the element directly under an applied load . The entire procedure was verified by comparing the results obtained for the common link with experimental results in the literature and with analytical results obtained using a mechanics of materials approach. All of the results were in close agreement. | |
Identifier: | 14023 (digitool), FADT14023 (IID), fau:10841 (fedora) | |
Collection: | FAU Electronic Theses and Dissertations Collection | |
Note(s): |
College of Engineering and Computer Science Thesis (M.S.E.)--Florida Atlantic University, 1980. |
|
Subject(s): | Stress concentration | |
Held by: | Florida Atlantic University Libraries | |
Persistent Link to This Record: | http://purl.flvc.org/fcla/dt/14023 | |
Sublocation: | Digital Library | |
Use and Reproduction: | Copyright © is held by the author, with permission granted to Florida Atlantic University to digitize, archive and distribute this item for non-profit research and educational purposes. Any reuse of this item in excess of fair use or other copyright exemptions requires permission of the copyright holder. | |
Use and Reproduction: | http://rightsstatements.org/vocab/InC/1.0/ | |
Host Institution: | FAU | |
Is Part of Series: | Florida Atlantic University Digital Library Collections. |