View All Items

Title: Complete thermal design and modeling for the pressure vessel of an ocean turbine -: a numerical simulation and optimization approach.
Creator: Kaiser, Khaled., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: This thesis is an approach of numerical optimization of thermal design of the ocean turbine developed by the Centre of Ocean Energy and Technology (COET). The technique used here is the integrated method of finite element analysis (FEA) of heat transfer, artificial neural network (ANN) and genetic algorithm (GA) for optimization purposes.
Date Issued: 2009
PURL: http://purl.flvc.org/FAU/369194
Subject Headings: Thermal analysis, Computer programs, Heat exchangers, Design and construction, Marine turbines, Testing, Mathematical models, Fluid dynamics
Format: Document (PDF)

Title: Design and analysis of an ocean current turbine performance assessment system.
Creator: Young, Matthew T., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: This thesis proposes a sensor approach for quantifying the hydrodynamic performance of Ocean Current Turbines (OCT), and investigates the influence of sensor-specific noise and sampling rates on calculated turbine performance. Numerical models of the selected sensors are developed, and then utilized to add stochastic measurement error to numerically-generated, non-stochastic OCT data. Numerically-generated current velocity and turbine performance measurements are used to quantify the relative...
Show moreThis thesis proposes a sensor approach for quantifying the hydrodynamic performance of Ocean Current Turbines (OCT), and investigates the influence of sensor-specific noise and sampling rates on calculated turbine performance. Numerical models of the selected sensors are developed, and then utilized to add stochastic measurement error to numerically-generated, non-stochastic OCT data. Numerically-generated current velocity and turbine performance measurements are used to quantify the relative influence of sensor-specific error and sampling limitations on sensor measurements and calculated OCT performance results. The study shows that the addition of sensor error alters the variance and mean of OCT performance metric data by roughly 7.1% and 0.24%, respectively, for four evaluated operating conditions. It is shown that sensor error results in a mean, maximum and minimum performance metric to Signal to Noise Ration (SNR) of 48.6% and 6.2%, respectively.
Show less
Date Issued: 2012
PURL: http://purl.flvc.org/FAU/3359164
Subject Headings: Marine turbines, Mathematical models, Fluid dynamics, Structural dynamics, Stochastic processes, Rotors, Design and construction, Testing
Format: Document (PDF)

Title: Design and finite element analysis of an ocean current turbine blade.
Creator: Asseff, Nicholas S., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: A composite 3 meter ocean current turbine blade has been designed and analyzed using Blade Element Theory (BET) and commercial Finite Element Modeling (FEM) code, ANSYS. It has been observed that using the numerical BET tool created, power production up to 141 kW is possible from a 3 bladed rotor in an ocean current of 2.5 m/s with the proposed blade design. The blade is of sandwich construction with carbon fiber skin and high density foam core. It also contains two webs made of S2-glass for...
Show moreA composite 3 meter ocean current turbine blade has been designed and analyzed using Blade Element Theory (BET) and commercial Finite Element Modeling (FEM) code, ANSYS. It has been observed that using the numerical BET tool created, power production up to 141 kW is possible from a 3 bladed rotor in an ocean current of 2.5 m/s with the proposed blade design. The blade is of sandwich construction with carbon fiber skin and high density foam core. It also contains two webs made of S2-glass for added shear rigidity. Four design cases were analyzed, involving differences in hydrodynamic shape, material properties, and internal structure. Results from the linear static structural analysis revealed that the best design provides adequate stiffness and strength to produce the proposed power without any structural failure. An Eigenvalue Buckling analysis confirmed that the blade would not fail from buckling prior to overstressed laminate failure if the loading was to exceed the Safety Factor.
Show less
Date Issued: 2009
PURL: http://purl.flvc.org/FAU/221944
Subject Headings: Marine turbines, Mathematical models, Fluid dynamics, Structural dynamics, Composite materials, Mathematical models
Format: Document (PDF)

Title: Detection, localization, and identification of bearings with raceway defect for a dynamometer using high frequency modal analysis of vibration across an array of accelerometers.
Creator: Waters, Nicholas., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: This thesis describes a method to detect, localize and identify a faulty bearing in a rotating machine using narrow band envelope analysis across an array of accelerometers. This technique is developed as part of the machine monitoring system of an ocean turbine. A rudimentary mathematical model is introduced to provide an understanding of the physics governing the vibrations caused by a bearing with a raceway defect. This method is then used to detect a faulty bearing in two setups : on a...
Show moreThis thesis describes a method to detect, localize and identify a faulty bearing in a rotating machine using narrow band envelope analysis across an array of accelerometers. This technique is developed as part of the machine monitoring system of an ocean turbine. A rudimentary mathematical model is introduced to provide an understanding of the physics governing the vibrations caused by a bearing with a raceway defect. This method is then used to detect a faulty bearing in two setups : on a lathe and in a dynamometer.
Show less
Date Issued: 2012
PURL: http://purl.flvc.org/FAU/3359156
Subject Headings: Marine turbines, Mathematical models, Vibration, Measurement, Fluid dynamics, Dynamic testing
Format: Document (PDF)

Title: Development of an integrated computational tool for design and analysis of composite turbine blades under ocean current loading.
Creator: Zhou, Fang., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: A computational tool has been developed by integrating National Renewable Energy Laboratory (NREL) codes, Sandia National Laboratories' NuMAD, and ANSYS to investigate a horizontal axis composite ocean current turbine. The study focused on the design, analysis, and life prediction of composite blade considering random ocean current, cyclic rotation, and hurricane-driven ocean current. A structural model for a horizontal axis FAU research OCT blade was developed. Following NREL codes were used...
Show moreA computational tool has been developed by integrating National Renewable Energy Laboratory (NREL) codes, Sandia National Laboratories' NuMAD, and ANSYS to investigate a horizontal axis composite ocean current turbine. The study focused on the design, analysis, and life prediction of composite blade considering random ocean current, cyclic rotation, and hurricane-driven ocean current. A structural model for a horizontal axis FAU research OCT blade was developed. Following NREL codes were used: PreCom, BModes, ModeShape, AeroDyn and FAST. PreComp was used to compute section properties of the OCT blade. BModes and ModeShape calculated the mode shapes of the blade. Hydrodynamic loading on the OCT blade was calculated by modifying the inputs to AeroDyn and FAST. These codes were then used to obtain the dynamic response of the blade, including blade tip displacement, normal force (FN) and tangential force (FT), flap and edge bending moment distribution with respect to blade rotation.
Show less
Date Issued: 2013
PURL: http://purl.flvc.org/fcla/dt/3362582
Subject Headings: Structural dynamics, Fluid dynamics, Marine turbines, Mathematical models, Turbines, Blades, Design and construction
Format: Document (PDF)

Title: Dissipation and eddy mixing associated with flow past an underwater turbine.
Creator: Reza, Zaqie, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: The objective of this thesis is to analyze the flow past an ocean current turbine using a finite volume Navier-Stokes CFD solver. A full 3-D RANS approach in a moving reference frame is used to model the flow. By employing periodic boundary conditions, one-third of the flow-field is analyzed and the output is replicated to other sectors. Following validation of the computation with an experimental study, the flow fields and particle paths for the case of uniform and sheared incoming flows...
Show moreThe objective of this thesis is to analyze the flow past an ocean current turbine using a finite volume Navier-Stokes CFD solver. A full 3-D RANS approach in a moving reference frame is used to model the flow. By employing periodic boundary conditions, one-third of the flow-field is analyzed and the output is replicated to other sectors. Following validation of the computation with an experimental study, the flow fields and particle paths for the case of uniform and sheared incoming flows past a generic turbine with various blade pitch angles are evaluated and analyzed. Flow field and wake expansion are visualized. Eddy viscosity effects and its dependence on flow field conditions are investigated.
Show less
Date Issued: 2010
PURL: http://purl.flvc.org/FAU/2683537
Subject Headings: Vibration (Aerodynamics), Fine element method, Marine turbines, Mathematical models, Water currents, Forecasting, Computational fluid dynamics
Format: Document (PDF)

Title: Fatigue modeling of composite ocean current turbine blade.
Creator: Akram, Mohammad Wasim, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: The success of harnessing energy from ocean current will require a reliable structural design of turbine blade that is used for energy extraction. In this study we are particularly focusing on the fatigue life of a 3m length ocean current turbine blade. The blade consists of sandwich construction having polymeric foam as core, and carbon/epoxy as face sheet. Repetitive loads (Fatigue) on the blade have been formulated from the randomness of the ocean current associated with turbulence and...
Show moreThe success of harnessing energy from ocean current will require a reliable structural design of turbine blade that is used for energy extraction. In this study we are particularly focusing on the fatigue life of a 3m length ocean current turbine blade. The blade consists of sandwich construction having polymeric foam as core, and carbon/epoxy as face sheet. Repetitive loads (Fatigue) on the blade have been formulated from the randomness of the ocean current associated with turbulence and also from velocity shear. These varying forces will cause a cyclic variation of bending and shear stresses subjecting to the blade to fatigue. Rainflow Counting algorithm has been used to count the number of cycles within a specific mean and amplitude that will act on the blade from random loading data. Finite Element code ANSYS has been used to develop an S-N diagram with a frequency of 1 Hz and loading ratio 0.1 Number of specific load cycles from Rainflow Counting in conjunction with S-N diagram from ANSYS has been utilized to calculate fatigue damage up to 30 years by Palmgren-Miner's linear hypothesis.
Show less
Date Issued: 2010
PURL: http://purl.flvc.org/FAU/2867332
Subject Headings: Turbines, Blades, Materials, Fatigue, Marine turbines, Mathematical models, Structural dynamics, Composite materials, Mathematical models, Sandwich construction, Fatigue
Format: Document (PDF)

Title: Hydrodynamic analysis of ocean current turbines using vortex lattice method.
Creator: Goly, Aneesh, College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: The main objective of the thesis is to carry out a rigorous hydrodynamic analysis of ocean current turbines and determine power for a range of flow and geometric parameters. For the purpose, a computational tool based on the vortex lattice method (VLM) is developed. Velocity of the flow on the turbine blades, in relation to the freestream velocity, is determined through induction factors. The geometry of trailing vortices is taken to be helicoidal. The VLM code is validated by comparing its...
Show moreThe main objective of the thesis is to carry out a rigorous hydrodynamic analysis of ocean current turbines and determine power for a range of flow and geometric parameters. For the purpose, a computational tool based on the vortex lattice method (VLM) is developed. Velocity of the flow on the turbine blades, in relation to the freestream velocity, is determined through induction factors. The geometry of trailing vortices is taken to be helicoidal. The VLM code is validated by comparing its results with other theoretical and experimental data corresponding to flows about finite-aspect ratio foils, swept wings and a marine current turbine. The validated code is then used to study the performance of the prototype gulfstream turbine for a range of parameters. Power and thrust coefficients are calculated for a range of tip speed ratios and pitch angles. Of all the cases studied, the one corresponding to tip speed ratio of 8 and uniform pitch angle 20 produced the maximum power of 41.3 [kW] in a current of 1.73 [m/s]. The corresponding power coefficient is 0.45 which is slightly less than the Betz limit power coefficient of 0.5926. The VLM computational tool developed for the research is found to be quite efficient in that it takes only a fraction of a minute on a regular laptop PC to complete a run. The tool can therefore be efficiently used or integrated into software for design optimization.
Show less
Date Issued: 2010
PURL: http://purl.flvc.org/FAU/2683131
Subject Headings: Marine turbines, Mathematical models, Water currents, Forecasting, Mathematical models, Aerodynamics, Mathematics, Finite element method
Format: Document (PDF)

Title: Methodology for fault detection and diagnostics in an ocean turbine using vibration analysis and modeling.
Creator: Mjit, Mustapha., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: This thesis describes a methodology for mechanical fault detection and diagnostics in an ocean turbine using vibration analysis and modeling. This methodology relies on the use of advanced methods for machine vibration analysis and health monitoring. Because of some issues encountered with traditional methods such as Fourier analysis for non stationary rotating machines, the use of more advanced methods such as Time-Frequency Analysis is required. The thesis also includes the development of...
Show moreThis thesis describes a methodology for mechanical fault detection and diagnostics in an ocean turbine using vibration analysis and modeling. This methodology relies on the use of advanced methods for machine vibration analysis and health monitoring. Because of some issues encountered with traditional methods such as Fourier analysis for non stationary rotating machines, the use of more advanced methods such as Time-Frequency Analysis is required. The thesis also includes the development of two LabVIEW models. The first model combines the advanced methods for on-line condition monitoring. The second model performs the modal analysis to find the resonance frequencies of the subsystems of the turbine. The dynamic modeling of the turbine using Finite Element Analysis is used to estimate the baseline of vibration signals in sensors locations under normal operating conditions of the turbine. All this information is necessary to perform the vibration condition monitoring of the turbine.
Show less
Date Issued: 2009
PURL: http://purl.flvc.org/FAU/369198
Subject Headings: Marine turbines, Mathematical models, Fluid dynamics, Structural dynamics, Composite materials, Mathematical models, Elastic analysis (Engineering)
Format: Document (PDF)

Title: Model analysis of a mooring system for an ocean current turbine testing platform.
Creator: Cribbs, Allison Rose., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: In response to Florida's growing energy needs and drive to develop renewable power, Florida Atlantic Universitys Center for Ocean Energy Technology (COET) plans to moor a 20 kW test turbine in the Florida Current. No permanent mooring systems for deepwater hydrokinetic turbines have been constructed and deployed, therefore little if anything is known about the performance of these moorings. To investigate this proposed mooring system, a numeric model is developed and then used to predict the...
Show moreIn response to Florida's growing energy needs and drive to develop renewable power, Florida Atlantic Universitys Center for Ocean Energy Technology (COET) plans to moor a 20 kW test turbine in the Florida Current. No permanent mooring systems for deepwater hydrokinetic turbines have been constructed and deployed, therefore little if anything is known about the performance of these moorings. To investigate this proposed mooring system, a numeric model is developed and then used to predict the static and dynamic behavior of the mooring system and attachments. The model has been created in OrcaFlex and includes two surface buoys and an operating turbine. Anchor chain at the end of the mooring line develops a catenary, providing compliance. Wind, wave, and current models are used to represent the environmental conditions the system is expected to experience and model the dynamic effects on the system. The model is then used to analyze various components of the system. The results identify that a mooring attachment point 1.25 m forward of the center of gravity on the mooring buoy is ideal, and that the OCDP and turbine tether lengths should be no shorter than 25 and 44 m, respectively. Analysis performed for the full system identify that the addition of the floats decreases the tension at the MTB attachment location by 26.5 to 29.5% for minimum current, and 0.10 to 0.31% for maximum current conditions.
Show less
Date Issued: 2010
PURL: http://purl.flvc.org/FAU/2974432
Subject Headings: Marine turbines, Mathematical models, Structural dynamics, Rotors, Design and construction, Offshore structures, Testing
Format: Document (PDF)

Title: Numerical performance prediction for FAU's first generation ocean current turbine.
Creator: Vanrietvelde, Nicolas., College of Engineering and Computer Science, Department of Ocean and Mechanical Engineering
Abstract/Description: This thesis presents the analytically predicted position, motion, attitude, power output and forces on Florida Atlantic University's (FAU) first generation ocean current turbine for a wide range of operating conditions. These values are calculated using a 7- DOF dynamics simulation of the turbine and the cable that attaches it to the mooring system. The numerical simulation modifications and upgrades completed in this work include developing a wave model including the effects of waves into...
Show moreThis thesis presents the analytically predicted position, motion, attitude, power output and forces on Florida Atlantic University's (FAU) first generation ocean current turbine for a wide range of operating conditions. These values are calculated using a 7- DOF dynamics simulation of the turbine and the cable that attaches it to the mooring system. The numerical simulation modifications and upgrades completed in this work include developing a wave model including the effects of waves into the simulation, upgrading the rotor model to specify the number of blades and upgrading the cable model to specify the number of cable elements. This enhanced simulation is used to quantify the turbine's performance in a wide range of currents, wave fields and when stopping and starting the rotor. For a uniform steady current this simulation predicts that when the rotor is fixed in 1.5 m/s current the drag on the turbine is 3.0 kN, the torque on the rotor is 384 N-m, the turbine roll and pitch are 2.4º and -1.2º . When the rotor is allowed to spin up to the rotational velocity where the turbine produces maximum power, the turbine drag increases to 7.3 kN, the torque increases to 1482 N-m, the shaft power is 5.8 kW, the turbine roll increases to 9º and the turbine pitch stays constant. Subsequently, a sensitivity analysis is done to evaluate changes in turbine performance caused by changes in turbine design and operation. This analysis show, among other things, that a non-axial flow on the turbine of up to 10º has a minimal effect on net power output and that the vertical stable position of the turbine varies linearly with the weight/buoyancy of the turbine with a maximum variation of 1.77 m for each increase or decrease of 1 kg at a current speed of 0.5 m/s.
Show less
Date Issued: 2009
PURL: http://purl.flvc.org/FAU/2182033
Subject Headings: Marine turbines, Mathematical models, Structural dynamics, Rotors, Design and construction, Testing, Fluid dynamics
Format: Document (PDF)

Mathematical models (11)	+ -
Fluid dynamics (7)	+ -
Structural dynamics (7)	+ -
Design and construction (5)	+ -
Testing (4)	+ -

Composite materials (3)	+ -
Rotors (3)	+ -
Blades (2)	+ -
Forecasting (2)	+ -
Turbines (2)	+ -
Water currents (2)	+ -
Aerodynamics (1)	+ -
Computational fluid dynamics (1)	+ -
Computer programs (1)	+ -
Dynamic testing (1)	+ -
Elastic analysis (Engineering) (1)	+ -
Fatigue (1)	+ -
Fine element method (1)	+ -
Finite element method (1)	+ -
Heat exchangers (1)	+ -
Materials (1)	+ -
Mathematics (1)	+ -
Measurement (1)	+ -
Offshore structures (1)	+ -
Sandwich construction (1)	+ -
Stochastic processes (1)	+ -
Thermal analysis (1)	+ -
Vibration (1)	+ -
Vibration (Aerodynamics) (1)	+ -

College of Engineering and Computer Science (11)	+ -
Akram, Mohammad Wasim (1)	+ -
Asseff, Nicholas S. (1)	+ -
Cribbs, Allison Rose. (1)	+ -
Goly, Aneesh (1)	+ -

Kaiser, Khaled. (1)	+ -
Mjit, Mustapha. (1)	+ -
Reza, Zaqie (1)	+ -
Vanrietvelde, Nicolas. (1)	+ -
Waters, Nicholas. (1)	+ -
Young, Matthew T. (1)	+ -
Zhou, Fang. (1)	+ -

Search In

Sort Results By:

Narrow results by:

Collection

Topical Subject

Genre

Type of Resource

Language

Creator

Format

Owner