View All Items

Title: Three-group software quality classification modeling with TREEDISC algorithm.
Creator: Liu, Yongbin., Florida Atlantic University, Khoshgoftaar, Taghi M., College of Engineering and Computer Science, Department of Computer and Electrical Engineering and Computer Science
Abstract/Description: Maintaining superior quality and reliability of software systems is important nowadays. Software quality modeling detects fault-prone modules and enables us to achieve high quality in software system by focusing on fewer modules, because of limited resources and budget. Tree-based modeling is a simple and effective method that predicts the fault proneness in software systems. In this thesis, we introduce TREEDISC modeling technique with a three-group classification rule to predict the quality...
Show moreMaintaining superior quality and reliability of software systems is important nowadays. Software quality modeling detects fault-prone modules and enables us to achieve high quality in software system by focusing on fewer modules, because of limited resources and budget. Tree-based modeling is a simple and effective method that predicts the fault proneness in software systems. In this thesis, we introduce TREEDISC modeling technique with a three-group classification rule to predict the quality of software modules. A general classification rule is applied and validated. The three impact parameters, group number, minimum leaf size and significant level, are thoroughly evaluated. An optimization procedure is conducted and empirical results are presented. Conclusions about the impact factors as well as the robustness of our research are performed. TREEDISC modeling technique with three-group classification has proved to be an efficient and convincing method in software quality control.
Show less
Date Issued: 2003
PURL: http://purl.flvc.org/fcla/dt/13008
Subject Headings: Computer software--Quality control, Software measurement, Decision trees
Format: Document (PDF)

Title: Software quality prediction using case-based reasoning.
Creator: Berkovich, Yevgeniy., Florida Atlantic University, Khoshgoftaar, Taghi M.
Abstract/Description: The ability to efficiently prevent faults in large software systems is a very important concern of software project managers. Successful testing allows us to build quality software systems. Unfortunately, it is not always possible to effectively test a system due to time, resources, or other constraints. A critical bug may cause catastrophic consequences, such as loss of life or very expensive equipment. We can facilitate testing by finding where faults are more likely to be hidden. Case...
Show moreThe ability to efficiently prevent faults in large software systems is a very important concern of software project managers. Successful testing allows us to build quality software systems. Unfortunately, it is not always possible to effectively test a system due to time, resources, or other constraints. A critical bug may cause catastrophic consequences, such as loss of life or very expensive equipment. We can facilitate testing by finding where faults are more likely to be hidden. Case-Based Reasoning (CBR) is one of many methodologies that make this process faster and cheaper by discovering faults early in the software life cycle. This is one of the methodologies used to predict software quality of the system by discovering fault-prone modules. We employ the SMART tool to facilitate CBR , using product and process metrics as independent variables. The study found that CBR is a robust tool capable of carrying out software quality prediction on its own with acceptable results. We also show that CBR's weaknesses do not hinder its effectiveness in finding misclassified modules.
Show less
Date Issued: 2000
PURL: http://purl.flvc.org/fcla/dt/12671
Subject Headings: Computer software--Quality control, Computer software--Evaluation, Software measurement
Format: Document (PDF)

Title: Software quality modeling and analysis with limited or without defect data.
Creator: Seliya, Naeem A., Florida Atlantic University, Khoshgoftaar, Taghi M., College of Engineering and Computer Science, Department of Computer and Electrical Engineering and Computer Science
Abstract/Description: The key to developing high-quality software is the measurement and modeling of software quality. In practice, software measurements are often used as a resource to model and comprehend the quality of software. The use of software measurements to understand quality is accomplished by a software quality model that is trained using software metrics and defect data of similar, previously developed, systems. The model is then applied to estimate quality of the target software project. Such an...
Show moreThe key to developing high-quality software is the measurement and modeling of software quality. In practice, software measurements are often used as a resource to model and comprehend the quality of software. The use of software measurements to understand quality is accomplished by a software quality model that is trained using software metrics and defect data of similar, previously developed, systems. The model is then applied to estimate quality of the target software project. Such an approach assumes that defect data is available for all program modules in the training data. Various practical issues can cause an unavailability or limited availability of defect data from the previously developed systems. This dissertation presents innovative and practical techniques for addressing the problem of software quality analysis when there is limited or completely absent defect data. The proposed techniques for software quality analysis without defect data include an expert-based approach with unsupervised clustering and an expert-based approach with semi-supervised clustering. The proposed techniques for software quality analysis with limited defect data includes a semi-supervised classification approach with the Expectation-Maximization algorithm and an expert-based approach with semi-supervised clustering. Empirical case studies of software measurement datasets obtained from multiple NASA software projects are used to present and evaluate the different techniques. The empirical results demonstrate the attractiveness, benefit, and definite promise of the proposed techniques. The newly developed techniques presented in this dissertation is invaluable to the software quality practitioner challenged by the absence or limited availability of defect data from previous software development experiences.
Show less
Date Issued: 2005
PURL: http://purl.flvc.org/fcla/dt/12151
Subject Headings: Software measurement, Computer software--Quality control, Computer software--Reliability--Mathematical models, Software engineering--Quality control
Format: Document (PDF)

Title: Software quality classification using rule-based modeling.
Creator: Mao, Meihui., Florida Atlantic University, Khoshgoftaar, Taghi M., College of Engineering and Computer Science, Department of Computer and Electrical Engineering and Computer Science
Abstract/Description: Software-based products are part of our daily life. They can be encountered in most of the systems we interact with. This reliance on software products generates a strong need for better software reliability, reducing the cost associated with potential failures. Reliability in software systems may be achieved by using additional testing. However, extensive software testing is expensive and time consuming. Software quality classification models provide an early prediction of a module's quality...
Show moreSoftware-based products are part of our daily life. They can be encountered in most of the systems we interact with. This reliance on software products generates a strong need for better software reliability, reducing the cost associated with potential failures. Reliability in software systems may be achieved by using additional testing. However, extensive software testing is expensive and time consuming. Software quality classification models provide an early prediction of a module's quality. Boolean Discriminant Function (BDF), Generalized Boolean Discriminant Function (GBDF), and Rule-Based Modeling (RBM) can be used as classification models. This thesis demonstrates the ability of GBDF and RBM to correctly classify modules. The introduction of the AND operator in the GBDF model and the customizable outcomes for the rules in RBM, enhanced the discriminating quality of GBDF and RBM as compared to BDF. Furthermore, they also yielded better balances for the misclassification rates.
Show less
Date Issued: 2002
PURL: http://purl.flvc.org/fcla/dt/12886
Subject Headings: Computer software--Quality control, Software measurement
Format: Document (PDF)

Title: Software metrics collection: Two new research tools.
Creator: Jordan, Sylviane G., Florida Atlantic University, Khoshgoftaar, Taghi M.
Abstract/Description: Collecting software metrics manually could be a tedious, inaccurate, and subjective task. Two new tools were developed to automate this process in a rapid, accurate, and objective way. The first tool, the Metrics Analyzer, evaluates 19 metrics at the function level, from complete or partial systems written in C. The second tool, the Call Graph Generator, does not assess a metric directly, but generates a call graph based on a complete or partial system written in C. The call graph is used as...
Show moreCollecting software metrics manually could be a tedious, inaccurate, and subjective task. Two new tools were developed to automate this process in a rapid, accurate, and objective way. The first tool, the Metrics Analyzer, evaluates 19 metrics at the function level, from complete or partial systems written in C. The second tool, the Call Graph Generator, does not assess a metric directly, but generates a call graph based on a complete or partial system written in C. The call graph is used as an input to another tool (not considered here) that measures the coupling of a module, such as a function or a file. A case study analyzed the relationships among the metrics, including the coupling metric, using principal component analysis, which transformed the 19 metrics into eight principal components.
Show less
Date Issued: 1997
PURL: http://purl.flvc.org/fcla/dt/15483
Subject Headings: Software measurement, Computer software--Development, Computer software--Evaluation
Format: Document (PDF)

Title: Software fault prediction using tree-based models.
Creator: Seliya, Naeem A., Florida Atlantic University, Khoshgoftaar, Taghi M., College of Engineering and Computer Science, Department of Computer and Electrical Engineering and Computer Science
Abstract/Description: Maintaining superior quality and reliability in software systems is of utmost importance in today's world. Early fault prediction is a proven method for achieving this. Tree based modelling is a simple and effective method that can be used to predict the number of faults in a software system. In this thesis, we use regression tree based modelling to predict the number of faults in a software module. The goal of this study is four-fold. First, a comparative study of the tree based modelling...
Show moreMaintaining superior quality and reliability in software systems is of utmost importance in today's world. Early fault prediction is a proven method for achieving this. Tree based modelling is a simple and effective method that can be used to predict the number of faults in a software system. In this thesis, we use regression tree based modelling to predict the number of faults in a software module. The goal of this study is four-fold. First, a comparative study of the tree based modelling tools CART and S-PLUS. CART yielded simpler regression trees than those built by S-PLUS. Second, a comparative study of the least squares and the least absolute deviation methods of CART. It is shown that the latter yielded better results than the former. Third, a study of the possible benefits of using principal components analysis when performing regression tree modelling. The fourth and final study is a comparison of tree based modelling with other prediction techniques namely, Case Based Reasoning, Artificial Neural Networks and Multiple Linear Regression.
Show less
Date Issued: 2001
PURL: http://purl.flvc.org/fcla/dt/12782
Subject Headings: Software measurement, Computer software--Quality control
Format: Document (PDF)

Title: Prediction of software quality using classification tree modeling.
Creator: Naik, Archana B., Florida Atlantic University, Khoshgoftaar, Taghi M., College of Engineering and Computer Science, Department of Computer and Electrical Engineering and Computer Science
Abstract/Description: Reliability of software systems is one of the major concerns in today's world as computers have really become an integral part of our lives. Society has become so dependent on reliable software systems that failures can be dangerous in terms of worsening a company's business, human relationships or affecting human lives. Software quality models are tools for focusing efforts to find faults early in the development. In this experiment, we used classification tree modeling techniques to predict...
Show moreReliability of software systems is one of the major concerns in today's world as computers have really become an integral part of our lives. Society has become so dependent on reliable software systems that failures can be dangerous in terms of worsening a company's business, human relationships or affecting human lives. Software quality models are tools for focusing efforts to find faults early in the development. In this experiment, we used classification tree modeling techniques to predict the software quality by classifying program modules either as fault-prone or not fault-prone. We introduced the Classification And Regression Trees (scCART) algorithm as a tool to generate classification trees. We focused our experiments on very large telecommunications system to build quality models using set of product and process metrics as independent variables.
Show less
Date Issued: 1998
PURL: http://purl.flvc.org/fcla/dt/15600
Subject Headings: Computer software--Quality control, Computer software--Evaluation, Software measurement
Format: Document (PDF)

Title: Predicting decay in program modules of legacy software systems.
Creator: Joshi, Dhaval Kunvarabhai., Florida Atlantic University, Khoshgoftaar, Taghi M.
Abstract/Description: Legacy software systems may go through many releases. It is important to ensure that the reliability of a system improves with subsequent releases. Methods are needed to identify decaying software modules, i.e., modules for which quality decreases with each system release. Early identification of such modules during the software life cycle allows us to focus quality improvement efforts in a more productive manner, by reducing resources wasted for testing and improving the entire system. We...
Show moreLegacy software systems may go through many releases. It is important to ensure that the reliability of a system improves with subsequent releases. Methods are needed to identify decaying software modules, i.e., modules for which quality decreases with each system release. Early identification of such modules during the software life cycle allows us to focus quality improvement efforts in a more productive manner, by reducing resources wasted for testing and improving the entire system. We present a scheme to classify modules in three groups---Decayed, Improved, and Unchanged---based on a three-group software quality classification method. This scheme is applied to three different case studies, using a case-based reasoning three-group classification model. The model identifies decayed modules, and is validated over different releases. The main goal of this work is to focus on the evolution of program modules of a legacy software system to identify modules that are difficult to maintain and may need to be reengineered.
Show less
Date Issued: 2002
PURL: http://purl.flvc.org/fcla/dt/12899
Subject Headings: Software reengineering, Computer software--Quality control, Software measurement, Software maintenance
Format: Document (PDF)

Title: Partitioning filter approach to noise elimination: An empirical study in software quality classification.
Creator: Rebours, Pierre., Florida Atlantic University, Khoshgoftaar, Taghi M., College of Engineering and Computer Science, Department of Computer and Electrical Engineering and Computer Science
Abstract/Description: This thesis presents two new noise filtering techniques which improve the quality of training datasets by removing noisy data. The training dataset is first split into subsets, and base learners are induced on each of these splits. The predictions are combined in such a way that an instance is identified as noisy if it is misclassified by a certain number of base learners. The Multiple-Partitioning Filter combines several classifiers on each split. The Iterative-Partitioning Filter only uses...
Show moreThis thesis presents two new noise filtering techniques which improve the quality of training datasets by removing noisy data. The training dataset is first split into subsets, and base learners are induced on each of these splits. The predictions are combined in such a way that an instance is identified as noisy if it is misclassified by a certain number of base learners. The Multiple-Partitioning Filter combines several classifiers on each split. The Iterative-Partitioning Filter only uses one base learner, but goes through multiple iterations. The amount of noise removed is varied by tuning the filtering level or the number of iterations. Empirical studies on a high assurance software project compare the effectiveness of our noise removal approaches with two other filters, the Cross-Validation Filter and the Ensemble Filter. Our studies suggest that using several base classifiers as well as performing several iterations with a conservative scheme may improve the efficiency of the filter.
Show less
Date Issued: 2004
PURL: http://purl.flvc.org/fcla/dt/13110
Subject Headings: Software measurement, Computer software--Quality control, Decision trees, Recursive partitioning
Format: Document (PDF)

Title: Modeling software quality at system and subsystem level with TREEDISC classification algorithm.
Creator: Liu, Jinxia., Florida Atlantic University, Khoshgoftaar, Taghi M., College of Engineering and Computer Science, Department of Computer and Electrical Engineering and Computer Science
Abstract/Description: Software quality models are tools for detecting faults early in the software development process. In this research, the TREEDISC algorithm and a general classification rule were used to create classification tree models and predict software quality by classifying software modules as fault-prone or not fault-prone. Software metrics were collected from four consecutive releases of a very large legacy telecommunications system with six subsystems. Using release 1, four classification tree models...
Show moreSoftware quality models are tools for detecting faults early in the software development process. In this research, the TREEDISC algorithm and a general classification rule were used to create classification tree models and predict software quality by classifying software modules as fault-prone or not fault-prone. Software metrics were collected from four consecutive releases of a very large legacy telecommunications system with six subsystems. Using release 1, four classification tree models were built using raw metrics, and another four tree models were built using PCA metrics. Models were then selected based on release 2. Releases 3 and 4 were used to validate the selected model. Models that used PCA metrics were as good as or better than models that used raw metrics. This study also investigated the performance of classification tree models, when the subsystem identifier was included as a predictor.
Show less
Date Issued: 2001
PURL: http://purl.flvc.org/fcla/dt/12747
Subject Headings: Computer software--Quality control, Software measurement
Format: Document (PDF)

Title: A metrics-based software quality modeling tool.
Creator: Rajeevalochanam, Jayanth Munikote., Florida Atlantic University, Khoshgoftaar, Taghi M., College of Engineering and Computer Science, Department of Computer and Electrical Engineering and Computer Science
Abstract/Description: In today's world, high reliability has become an essential component of almost every software system. However, since the reliability-enhancement activities entail enormous costs, software quality models, based on the metrics collected early in the development life cycle, serve as handy tools for cost-effectively guiding such activities to the software modules that are likely to be faulty. Case-Based Reasoning (CBR) is an attractive technique for software quality modeling. Software Measurement...
Show moreIn today's world, high reliability has become an essential component of almost every software system. However, since the reliability-enhancement activities entail enormous costs, software quality models, based on the metrics collected early in the development life cycle, serve as handy tools for cost-effectively guiding such activities to the software modules that are likely to be faulty. Case-Based Reasoning (CBR) is an attractive technique for software quality modeling. Software Measurement Analysis and Reliability Toolkit (SMART) is a CBR tool customized for metrics-based software quality modeling. Developed for the NASA IV&V Facility, SMART supports three types of software quality models: quantitative quality prediction, classification, and module-order models. It also supports a goal-oriented selection of classification models. An empirical case study of a military command, control, and communication system demonstrates the accuracy and usefulness of SMART, and also serves as a user-guide for the tool.
Show less
Date Issued: 2002
PURL: http://purl.flvc.org/fcla/dt/12967
Subject Headings: Software measurement, Computer software--Quality control, Case-based reasoning
Format: Document (PDF)

Title: Measurement of coupling and cohesion of software.
Creator: Chen, Ye., Florida Atlantic University, Khoshgoftaar, Taghi M.
Abstract/Description: Graphs are often used to depict an abstraction of software. A graph may be an abstraction of a software system and a subgraph may represent a software module. Coupling and cohesion are attributes that summarize the degree of interdependence or connectivity among subsystems or within subsystems, respectively. When used in conjunction with measures of other attributes, coupling and cohesion can contribute to an assessment or prediction of software quality. Information theory is attractive to us...
Show moreGraphs are often used to depict an abstraction of software. A graph may be an abstraction of a software system and a subgraph may represent a software module. Coupling and cohesion are attributes that summarize the degree of interdependence or connectivity among subsystems or within subsystems, respectively. When used in conjunction with measures of other attributes, coupling and cohesion can contribute to an assessment or prediction of software quality. Information theory is attractive to us because the design decisions embodied by the graph are information. Using information theory, we propose measures of the cohesion and coupling of a modular system and cohesion and coupling of each constituent module. These measures conform to the properties of cohesion and coupling defined by Briand, Morasca and Basili, applied to undirected graphs and therefore, are in the families of measures called cohesion and coupling.
Show less
Date Issued: 2000
PURL: http://purl.flvc.org/fcla/dt/15760
Subject Headings: Information theory, Computer software--Evaluation, Software measurement
Format: Document (PDF)

Title: Implementation of a three-group classification model using case-based reasoning.
Creator: Song, Huiming., Florida Atlantic University, Khoshgoftaar, Taghi M., College of Engineering and Computer Science, Department of Computer and Electrical Engineering and Computer Science
Abstract/Description: Reliability is becoming a very important and competitive factor for software products. Software quality models based on software metrics provide a systematic and scientific way to detect software faults early and to improve software reliability. Classification models for software quality usually classify observations using two groups. This thesis presents a new algorithm for classification using three groups, i.e., Three-Group Classification Model using Case Based Reasoning. The basic idea...
Show moreReliability is becoming a very important and competitive factor for software products. Software quality models based on software metrics provide a systematic and scientific way to detect software faults early and to improve software reliability. Classification models for software quality usually classify observations using two groups. This thesis presents a new algorithm for classification using three groups, i.e., Three-Group Classification Model using Case Based Reasoning. The basic idea behind the algorithm is that it uses the commonly used two-group classification method three times. This algorithm can be implemented with other techniques such as logistic regression, classification tree models, etc. This work compares its quality with the Discriminant Analysis method. We find that our new method performs much better than Discriminant Analysis. We also show that the addition of object-oriented software measures yielded a model that a practitioner may actually prefer over the simpler procedural measures model.
Show less
Date Issued: 2001
PURL: http://purl.flvc.org/fcla/dt/12816
Subject Headings: Software measurement, Computer software--Quality control
Format: Document (PDF)

Title: Evaluating indirect and direct classification techniques for network intrusion detection.
Creator: Ibrahim, Nawal H., Florida Atlantic University, Khoshgoftaar, Taghi M.
Abstract/Description: Increasing aggressions through cyber terrorism pose a constant threat to information security in our day to day life. Implementing effective intrusion detection systems (IDSs) is an essential task due to the great dependence on networked computers for the operational control of various infrastructures. Building effective IDSs, unfortunately, has remained an elusive goal owing to the great technical challenges involved, and applied data mining techniques are increasingly being utilized in...
Show moreIncreasing aggressions through cyber terrorism pose a constant threat to information security in our day to day life. Implementing effective intrusion detection systems (IDSs) is an essential task due to the great dependence on networked computers for the operational control of various infrastructures. Building effective IDSs, unfortunately, has remained an elusive goal owing to the great technical challenges involved, and applied data mining techniques are increasingly being utilized in attempts to overcome the difficulties. This thesis presents a comparative study of the traditional "direct" approaches with the recently explored "indirect" approaches of classification which use class binarization and combiner techniques for intrusion detection. We evaluate and compare the performance of IDSs based on various data mining algorithms, in the context of a well known network intrusion evaluation data set. It is empirically shown that data mining algorithms when applied using the indirect classification approach yield better intrusion detection models.
Show less
Date Issued: 2004
PURL: http://purl.flvc.org/fcla/dt/13128
Subject Headings: Computer networks--Security measures, Computer security, Software measurement, Data mining
Format: Document (PDF)

Title: An empirical study of resource-based selection of rule-based software quality classification models.
Creator: Herzberg, Angela., Florida Atlantic University, Khoshgoftaar, Taghi M.
Abstract/Description: Software managers are under pressure to deliver reliable and high quality software, within a limited time and budget. To achieve this goal, they can be aided by different modeling techniques that allow them to predict the quality of software, so that the improvement efforts can be directed to software modules that are more likely to be fault-prone. Also, different projects have different resource availability constraints, and being able to select a model that is suitable for a specific...
Show moreSoftware managers are under pressure to deliver reliable and high quality software, within a limited time and budget. To achieve this goal, they can be aided by different modeling techniques that allow them to predict the quality of software, so that the improvement efforts can be directed to software modules that are more likely to be fault-prone. Also, different projects have different resource availability constraints, and being able to select a model that is suitable for a specific resource constraint allows software managers to direct enhancement techniques more effectively and efficiently. In our study, we use Rule-Based Modeling ( RBM) to predict the likelihood of a module being fault-prone and the Modified Expected Cost of Misclassification (MECM ) measure to select the models that are suitable, in the context of the given resource constraints. This empirical study validates MECM as a measure to select an appropriate RBM model.
Show less
Date Issued: 2002
PURL: http://purl.flvc.org/fcla/dt/12968
Subject Headings: Software measurement, Computer software--Quality control
Format: Document (PDF)

Title: An empirical study of module order models.
Creator: Adipat, Boonlit., Florida Atlantic University, Khoshgoftaar, Taghi M.
Abstract/Description: Most software reliability approaches classify modules as fault-prone or not fault-prone by way of a predetermined threshold. However, it may not be practical to predefine a threshold because the amount of resources for reliability enhancement may be unknown. Therefore, a module-order model (MOM) predicting the rank order of modules can be used to solve this problem. The objective of this research is to make an empirical study of MOMs based on five different underlying quantitative software...
Show moreMost software reliability approaches classify modules as fault-prone or not fault-prone by way of a predetermined threshold. However, it may not be practical to predefine a threshold because the amount of resources for reliability enhancement may be unknown. Therefore, a module-order model (MOM) predicting the rank order of modules can be used to solve this problem. The objective of this research is to make an empirical study of MOMs based on five different underlying quantitative software quality models. We examine the benefits of principal components analysis with MOM and demonstrate that better accuracy of underlying techniques does not always yield better performance with MOM. Three case studies of large industrial software systems were conducted. The results confirm that MOM can create efficient models using different underlying techniques that provide various accuracy when predicting a quantitative software quality factor over the data sets.
Show less
Date Issued: 2001
PURL: http://purl.flvc.org/fcla/dt/12783
Subject Headings: Computer software--Quality control, Software measurement
Format: Document (PDF)

Title: An empirical study of analogy-based software quality classification models.
Creator: Ross, Fletcher Douglas., Florida Atlantic University, Khoshgoftaar, Taghi M., College of Engineering and Computer Science, Department of Computer and Electrical Engineering and Computer Science
Abstract/Description: Time and cost are among the most important elements in a software project. By efficiently using time and resources we can reduce costs. Any program can potentially contain faults. If we can identify those program modules that have better quality and are less likely to be fault-prone, then we can reduce the effort and cost required in testing these modules. This thesis presents a series of studies evaluating the use of Case-Based Reasoning (CBR ) as an effective method for classifying program...
Show moreTime and cost are among the most important elements in a software project. By efficiently using time and resources we can reduce costs. Any program can potentially contain faults. If we can identify those program modules that have better quality and are less likely to be fault-prone, then we can reduce the effort and cost required in testing these modules. This thesis presents a series of studies evaluating the use of Case-Based Reasoning (CBR ) as an effective method for classifying program modules based upon their quality. We believe that this is the first time that the mahalanobis distance, a distance measure utilizing the covariance matrix of the independent variables which accounts for the multi-colinearity of the data without the necessity for preprocessing, and data clustering, wherein the data was separated into groups based on a dependent variable have been used as modeling techniques in conjunction with (CBR).
Show less
Date Issued: 2001
PURL: http://purl.flvc.org/fcla/dt/12817
Subject Headings: Modular programming, Computer software--Quality control, Software measurement
Format: Document (PDF)

Title: An empirical study of analogy-based software fault prediction.
Creator: Sundaresh, Nandini., Florida Atlantic University, Khoshgoftaar, Taghi M., College of Engineering and Computer Science, Department of Computer and Electrical Engineering and Computer Science
Abstract/Description: Ensuring quality and reliability in software is important with its growing use in day to day life. Having an estimate of the number of faults in software modules early in their life cycles will enable software project managers to direct testing efforts in those considered risky and reduce the waste of resources in testing the entire software system. Case-based reasoning, abbreviated CBR, is one of the methods which predicts the number of faults in a software. The scope of this thesis is two...
Show moreEnsuring quality and reliability in software is important with its growing use in day to day life. Having an estimate of the number of faults in software modules early in their life cycles will enable software project managers to direct testing efforts in those considered risky and reduce the waste of resources in testing the entire software system. Case-based reasoning, abbreviated CBR, is one of the methods which predicts the number of faults in a software. The scope of this thesis is two-fold. First, it empirically investigates the effects of the different factors on the predictive accuracy of CBR. Experiments were done to compare different similarity functions, solution processes, and maximum number of nearest neighbors. Second, it compares the predictive accuracy of CBR models with multiple linear regression and artificial neural network models. The average absolute error and average relative error are used to determine the model with a high accuracy of prediction.
Show less
Date Issued: 2001
PURL: http://purl.flvc.org/fcla/dt/12749
Subject Headings: Computer software--Quality control, Software measurement
Format: Document (PDF)

Title: An empirical study of a three-group software quality classification model.
Creator: Cherukuri, Reena., Florida Atlantic University, Khoshgoftaar, Taghi M.
Abstract/Description: Maintaining superior quality and reliability of software systems is an important issue in software reliability engineering. Software quality estimation models based on software metrics provide a systematic and scientific way to detect fault-prone modules and enable us to achieve high quality in software systems by focusing on high-risk modules within limited resources and budget. In previous works, classification models for software quality usually classified modules into two groups, fault...
Show moreMaintaining superior quality and reliability of software systems is an important issue in software reliability engineering. Software quality estimation models based on software metrics provide a systematic and scientific way to detect fault-prone modules and enable us to achieve high quality in software systems by focusing on high-risk modules within limited resources and budget. In previous works, classification models for software quality usually classified modules into two groups, fault-prone or not fault-prone. This thesis presents a new technique for classifying modules into three groups, i.e., high-risk, medium-risk, and low-risk groups. This new technique calibrates three-group models according to the resources available, which makes it different from other classification techniques. The proposed three-group classification method proved to be efficient and useful for resource utilization in software quality control.
Show less
Date Issued: 2003
PURL: http://purl.flvc.org/fcla/dt/13004
Subject Headings: Software measurement, Computer software--Quality control
Format: Document (PDF)

Title: An empirical study of a three-group classification model using case-based reasoning.
Creator: Bhupathiraju, Sajan S., Florida Atlantic University, Khoshgoftaar, Taghi M.
Abstract/Description: Reliability is becoming a very important and competitive factor for software-based products. Software metrics-based quality estimation models provide a systematic and scientific approach to detect software faults early in the life cycle, improving software reliability. Classification models for software quality estimation usually classify observations into two groups. This thesis presents an empirical study of an algorithm for software quality classification using three groups: Three-Group...
Show moreReliability is becoming a very important and competitive factor for software-based products. Software metrics-based quality estimation models provide a systematic and scientific approach to detect software faults early in the life cycle, improving software reliability. Classification models for software quality estimation usually classify observations into two groups. This thesis presents an empirical study of an algorithm for software quality classification using three groups: Three-Group Classification Model using Case-Based Reasoning (CBR). The basic idea behind the algorithm is that it uses the commonly used two-group classification technique three times. It can also be implemented with other quality estimation methods, such as Logistic Regression, Regression Trees, etc. This work evaluates the obtained quality with that from the Discriminant Analysis method. Empirical studies were conducted using an inspection data set, collected from a telecommunications system. It was observed that CBR performs better than Discriminant Analysis.
Show less
Date Issued: 2002
PURL: http://purl.flvc.org/fcla/dt/12903
Subject Headings: Software measurement, Computer software--Quality control
Format: Document (PDF)

Computer software--Quality control (23)	+ -
Computer software--Evaluation (5)	+ -
Decision trees (2)	+ -
Bayesian statistical decision theory (1)	+ -
Case-based reasoning (1)	+ -

Computer networks--Security measures (1)	+ -
Computer security (1)	+ -
Computer software--Development (1)	+ -
Computer software--Reliability--Mathematical models (1)	+ -
Computer software--Testing (1)	+ -
Data mining (1)	+ -
Information theory (1)	+ -
Modular programming (1)	+ -
Recursive partitioning (1)	+ -
Software engineering (1)	+ -
Software engineering--Quality control (1)	+ -
Software maintenance (1)	+ -
Software reengineering (1)	+ -

Khoshgoftaar, Taghi M. (26)	+ -
College of Engineering and Computer Science (13)	+ -
Department of Computer and Electrical Engineering and Computer Science (13)	+ -
Seliya, Naeem A. (2)	+ -
Adipat, Boonlit. (1)	+ -

Berkovich, Yevgeniy. (1)	+ -
Bhupathiraju, Sajan S. (1)	+ -
Chen, Ye. (1)	+ -
Cherukuri, Reena. (1)	+ -
Deng, Jianyu. (1)	+ -
Dong, Yuhong. (1)	+ -
Geleyn, Erik. (1)	+ -
Guan, Xin. (1)	+ -
Herzberg, Angela. (1)	+ -
Ibrahim, Nawal H. (1)	+ -
Jordan, Sylviane G. (1)	+ -
Joshi, Dhaval Kunvarabhai. (1)	+ -
Liu, Jinxia. (1)	+ -
Liu, Yongbin. (1)	+ -
Mao, Meihui. (1)	+ -
Mao, Wenlei. (1)	+ -
Naik, Archana B. (1)	+ -
Ponnuswamy, Viswanathan Kolathupalayam. (1)	+ -
Rajeevalochanam, Jayanth Munikote. (1)	+ -
Rebours, Pierre. (1)	+ -
Ross, Fletcher Douglas. (1)	+ -
Song, Huiming. (1)	+ -
Sundaresh, Nandini. (1)	+ -

Search In

Pages

Pages

Sort Results By:

Narrow results by:

Collection

Topical Subject

Genre

Type of Resource

Language

Creator

Format

Owner