Current Search: Honeycomb structures (x)
View All Items
- Title
- FACE/CORE DISBONDING FRACTURE OF HONEYCOMB CORE SANDWICH PANELS.
- Creator
- Tauhiduzzaman, Mohammad, Carlsson, Leif A., Florida Atlantic University, Department of Ocean and Mechanical Engineering, College of Engineering and Computer Science
- Abstract/Description
-
The objective of the research presented in this thesis is to develop analysis and test procedures for the characterization of disbonding crack growth in a honeycomb (HC) core sandwich structure. Face sheet-to-core disbonding are of particular interest to aircraft certification authorities due to several in-service occurrences. Experimental investigation was initially focused on the mode I dominated Single Cantilever Beam (SCB) test method. Various data reduction methodologies were employed to...
Show moreThe objective of the research presented in this thesis is to develop analysis and test procedures for the characterization of disbonding crack growth in a honeycomb (HC) core sandwich structure. Face sheet-to-core disbonding are of particular interest to aircraft certification authorities due to several in-service occurrences. Experimental investigation was initially focused on the mode I dominated Single Cantilever Beam (SCB) test method. Various data reduction methodologies were employed to determine the fracture toughness. The MBT method produced the most consistent and conservative results. Finite element analysis (FEA) a double periodic array of hexagonal cells was conducted to determine the effective in-plane extensional modulus and Poisson ratio of the HC core. It was shown that deformation constraints on the core, due to attachment of the core to rigid face sheets, will drastically change the behavior of the HC core. The response changes from being governed by bending to stretching which substantially elevates the effective in-plane modulus. Fracture mechanics analysis of a face/core interface crack in a HC core SCB specimen was performed using FEA. The influence of in-plane properties of the constrained core on energy release rate and mode mixity phase angle was examined. Use of plane strain conditions and an elevated modulus of the constrained core in the analysis is recommended. The approach is substantiated by testing of HC core SCB sandwich. Test results showed good agreement with FEA prediction of compliance and kink angle.
Show less - Date Issued
- 2019
- PURL
- http://purl.flvc.org/fau/fd/FA00013419
- Subject Headings
- Honeycomb structures, Fracture mechanics, Strength of materials, Airframes--Materials
- Format
- Document (PDF)
- Title
- INFLUENCE OF DEFORMATION CONSTRAINTS OF HONEYCOMB CORE CELLS ON THE BENDING STIFFNESS OF SINGLE-FACE SANDWICH.
- Creator
- Ayanoglu, Mustafa Oguzhan, Carlsson, Leif A., Du, E, Florida Atlantic University, Department of Ocean and Mechanical Engineering, College of Engineering and Computer Science
- Abstract/Description
-
This research focuses on deformation constraints of honeycomb core cells in a sandwich imposed by bonds to the face sheets. Specifically, the influence of one-sided core constraints on the bending stiffness of a single-face honeycomb core sandwich is examined. To characterize the unconstrained in-plane compressive response of honeycomb core, a range of honeycomb cores was experimentally examined. Cores with a thin cell wall displayed extensive bending deformation of inclined cell walls while...
Show moreThis research focuses on deformation constraints of honeycomb core cells in a sandwich imposed by bonds to the face sheets. Specifically, the influence of one-sided core constraints on the bending stiffness of a single-face honeycomb core sandwich is examined. To characterize the unconstrained in-plane compressive response of honeycomb core, a range of honeycomb cores was experimentally examined. Cores with a thin cell wall displayed extensive bending deformation of inclined cell walls while cores with thicker walls failed by a shear-type instability of the cells indicated by tilting of vertical cell wall segments. The modulus and compressive strength of the core were compared to the predictions from unit cell models. The results show that geometrical imperfections such as deviation from the intended cell wall angle cause in-plane anisotropy and have strong influence on modulus and strength of the core. Modulus and strength were in reasonable agreement with predictions from unit cell models for cell wall modulus and strength between 5-12 GPa and 72-171 MPa for the set of cores examined.
Show less - Date Issued
- 2024
- PURL
- http://purl.flvc.org/fau/fd/FA00014438
- Subject Headings
- Honeycomb structures, Materials--Compression testing, Sandwich construction
- Format
- Document (PDF)